Jump to content

Recommended Posts

Posted

I would appreciate your thoughts on this question. I will be finishing up my CS17 Peggy-O this spring and I am starting to think about next project, and want to sign up for a summer wooden boat class 1/1/14 relevant to the next boat. I definitely want a powerboat with some speed for purpose of pleasure boating and going with a couple couples to lunch and cruising around the Gulf of Mexico near my home in SW FL. I am not into fishing and likely will never be......

My questions/ concerns about the OK20 is is it really designed as a fishing boat and is it comfortable for four or six people to cruise around? I can't really find any pictures that show the interior with seating. I like its speed, weight, gas efficiency/small motor for the speed, the cold molded building design as new experience and the fact that Graham designed it.

Thanks

Lennie


Posted

Since you're not worried about fishing I bet you could change the seating layout to accommodate the extra guests for the picnic.  Just make sure you don't add any weight since you want to go fast.  Maybe you could make a drop-in seat for when you had the extra couple on board.

Hopefully an Ocracoke 20 builder will share some interior photos.

Posted

Great points. I think the outer banks has features that are not big for me like cabin, and it sacrffifices speed. I think you nailed it Ken re mods and I will proceed down that road. I suspect the resale of OK20 would be stronger as well. A friend made a good point that maybe I should enjoy the cS17 for a bit before jumping into next build (thanks Steve).

I have signed up for the Cold Molded Construction at WBS this summer and will proceed leisurely and build when ready.

Posted

The ocracoke will handle 4-6 people no probs. They ride and beautifully and are powered by a relatively modest amount of hp considering the size of the boat. ( and they are a big 20 ft boat)

The build us quite straight forward and very strong. One thing I really liked about the hull was the chine detail whereby the chine is part of the hull, not a strip of timber tacked on the outside , it just looks better even though the caroliner lines have still been kept.

They are a great boat. Well designed, strong, functional and good looking. If you are up to the build.... Which isn't hard , but will require a big commitment , then go for it. You won't be disappointed.

Posted

Thanks Lance. I am sold! Will focus on completing CS17 for now and then wait to get hungry for next build. I have just taken three weeks to get away from the build as I felt need for break, but plan to go back at hard next week.

Thanks again

Len

Posted

Hey Lance!

Do you have any new pictures for us? A 10 or 15 minute video taken from a helicopter would do.

 

I think Lance sold his boat a good long time ago.  Hopefully he'll clarify that if it isn't the case.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


Supporting Members

Supporting Members can create Clubs, photo Galleries, don't see ads and make messing-about.com possible! Become a Supporting Member - only $12 for the next year. Pay by PayPal or credit card.




×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.