Jump to content

Riggs

Members
  • Posts

    161
  • Joined

  • Last visited

  • Days Won

    9

Everything posted by Riggs

  1. LOL and i get grief for using a butter knife to mix bondo This build should be a real hoot plus i get to keep it in reserve for when i get cought sculking of with one of the wife's appliances again. Keep posting
  2. 1 1/4" x 3 on the straits scarfed as per the drawings. The sections were the width is wider i only took the boards down to 5 1/2" x 1 1/2 and had to edge join using biscuits and Cascamite wood glue. These sections were clamped in many directions then put through a surface plane to get them down to 1 1/4. They are then ready for the bandsaw. I am going by what i learned about forty years ago in England from an older boat builder. He always told me that a stronger truer piece of wood can be achieved in this method. I hope it still applys Lastly there is Cascamite on every single surface requiring it, i use it over epoxy just for the mess angle. I hope it passes muster as i don't want to do it again LOL .
  3. The pine i have used is about 50 or 60 years old. It was the roof deck on my next door neighbours boat shed. It was 2x6 tongue and grove which is machined down to 1 1/4 x 3 then biscuited and scarfed as needed. It is very hard and very strait so not really to stressed, that being said should i be as i have built plenty furniture out of reclaimed lumber and it has all been fine. I just did not want to spend a heap on some mahogany then machine it all down. The keel as finished is dead strait were it needs to be and lays flat on the mylars exactly where it should so dimensionally it is good. It is going to sit there for a few weeks while i transfer lines from the mylars( not my favorite task as it kills my back) Then on to cutting frames , stringers ETC before it get's set up. The last pic is a pic of the end grain of the wood machined down to 1/4" x 3"
  4. Marissa # 63 is finally getting a motor hung on the transom. Christmas and a dead pickup kinda got in the way. My folks also came out for a visit which was great. That being said have managed to machine up some old heart pine and start getting a keel sorted. Looking forward to all the madness and of course the comments
  5. You probly no my Father in laws house then. He had a 54 ketch called the vagrant gypsy right there on the river south of I10 . Built his house there so as to be close to his boat which took him 3 years to build down in Honduras. This is were Marrisa #63 will be living when all finished
  6. Your an evil genius i assume
  7. Those monster energy drinks make me crazy Yes lotus i have thought about some trim tabs even though it will be heavier than drawn. I am on the Tchoutacabouffa river in Biloxi MS and there can be a lot of floating debris at times so i have glassed the entire bottom inside and out to much more of an extent than the drawings show. That being said i agree with you that it might very well need some tabs. My wife is totally happy with the fact that the boat is nearly finished as she is under the impression that i can now finish our house . She does not understand that Allen has shipped and i have picked up a nice shiny new set of OC20-B Drawings. Lumber for the keel is already hear and will be machined up soon, plywood is on order and will land after Thanksgiving. Maybe i will tell her then I will try to post up some pics of the launch and such when it happens. I hope before Christmas. You all have a good one
  8. Again thankyou for the praise. Yesterday i made all the hookups under the console. Main buss, steering throttle ETC. all seems to work fine. So now is just a little paint and finish then of to get a motor hung and be done Has been a lot of fun
  9. Thankyou much gentlemen, have some finishing to do on the deck and such fit a couple hatches and the like but yeah is just about done. Has been a lot of fun, now my wife will get a few things finished up around the house before i have a new project
  10. It is on the trailer and heading for the shop to get a motor hung in a few days Going with a 60 horse yamaha.
  11. Wow as always looking good That looks like it should work like a charm
  12. This is my peanut gallery My wife sculpts
  13. Thought i would post a few pics. Most everything seems to be moving along as it needs to other than the loss of my brain cells due to my growing addition to paint fumes. On the good side the temp here in the south along with the humidity i am hoping will drop allowing me to open up the doors. If not my boat is going to be owned by a cabbage
  14. Thankyou . Is Easy Poxy Electric sapphire blue with Bikini Blue
  15. So i have a couple coats of paint on and am gonna turn it over as i am sure that will not be the last coat of paint. Infact i am counting on it. Gonna turn it over on Saturday and get after the fitting out so to speak Gonna make a little cradle for it to sit in while that is being done on the morrow
  16. LOL That is really were i found him. He was in it under the sink at my father in laws fishing camp. he used to come out in the evening and just sit there and watch my wife and I . I let him go in the north forty and we never saw it again.
  17. This little fellow moved into our tempory diggs while we were building our house last year
  18. That look's very sexy Lotus. You gonna make any of the opening open for ventilation?
  19. Hey Guys . Yeah that Pettit primer worked nice but man it is some wicked smelly nasty gear. I ended up with a stand alone ac unit and a mini split on full tilt with a fan in the door while wearing a ventilator to apply it. Wife was complaining she could smell it in her studio which is a good 150' down the garden It does seem to have done the trick though, gonna get on some sanding over the next few days then maybe some paint. I am looking to do a satin finish but have not found any satin paint that is compatable yet but have not looked to hard yet. Am also thinking along the two tone lines Lotus used on his OC20" out in malta i like that look. Other than that it is looking like i will be having a turn over party next week some time Yea
  20. Hey Guys . Yeah that Pettit primer worked nice but man it is some wicked smelly nasty gear. I ended up with a stand alone ac unit and a mini split on full tilt with a fan in the door while wearing a ventilator to apply it. Wife was complaining she could smell it in her studio which is a good 150' down the garden It does seem to have done the trick though, gonna get on some sanding over the next few days then maybe some paint. I am looking to do a satin finish but have not found any satin paint that is compatable yet but have not looked to hard yet. Am also thinking along the two tone lines Lotus used on his OC20" out in malta i like that look. Other than that it is looking like i will be having a turn over party next week some time Yea
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.