Mark Rendelman hull 24 Posted February 23, 2020 Report Posted February 23, 2020 Hello again I have been busy finishing off the void under the chain locker and the forward storage locker all the surfaces have been coated with three coats of epoxy the first coat being cut with about 25% of acetone to enhance the penetration into the wood fibers, each coat of epoxy was sanded in between coats and then two coats of total boat single stage polyurethane paint. After all surfaces were painted I cleaned the edges down to bare wood again to get a good bond when I glued down the floor. The next thing will be to glue down the forward storage locker top. From this point I will be working on installing internal supports. As always any help will be greatly appreciated. mark Quote
Alan Stewart Posted February 25, 2020 Report Posted February 25, 2020 Looks like pretty work from here. Nice job. Quote
Hirilonde Posted February 25, 2020 Report Posted February 25, 2020 7 hours ago, Alan Stewart said: Looks like pretty work from here. Nice job. Pretty work? (shudders) Pretty job yes, I never look pretty after doing that kind of work. Quote
Steve W Posted February 26, 2020 Report Posted February 26, 2020 Making me feel bad for putting three coats of goop, installing a port and calling it a day. 1 Quote
Mark Rendelman hull 24 Posted February 28, 2020 Author Report Posted February 28, 2020 Thanks for the comments it’s always nice to know that the work I’am doing meets the quality of other much more experienced builders and that I, am on track to having a great looking boat mark Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.