Jump to content

Recommended Posts

Posted

CS 17 #86 Escape' has been launched twice. :D

First sail was solo in a builders shakedown launch. I had few technical issues and lots of wind. I saw the quickness of this boat in just a few minutes on the water but didn't want to press my luck until I could go back and fix my snotter and centerboard. Minor issues in the end and I wish I would have realized the easy solutions while still on the water. After fussing with folding the sails I also decided right then to glue my poles together and wrap the sails around them and carry them on top of the boat. This is really nice with the pvc holders to transport them like Gordy's pictures.

2nd launch was the public launch. A couple pictures are here. Calm wind conditions this day. None at all until I trolled out of the creek and into the main lake beyond camera shot from my photographer unfortunately.

We ghosted along nicely and we were very pleased at our progress and the boats ability to sail into the wind and tack with so little available wind. My certified sailer instructor/friend was very surprised in his first sail in a cat ketch. He marveled at the safety -no boom to hit your head, excellent stability even when were both on the same side, easy to sail.

We were all excited about our next launch date. Thanks Graham for a great design!

[attachment over 4 years old deleted by admin]


Posted

Congratulations! What a thrill to launch a boat made with ones own hands. And congratulations on the fine crew. Kids and boats is a great combination. Good sailing to you

Posted

Congratulations!

Nice pics and nice boat. You've finished it out exactly the way I was planning to do hull #110 - right down to the exterior color you used! Now I'll have to do something at least a little different. :)

Boat looks great and thanks of the pictures.

Posted

Hi Tim,

The boat looks real nice. Congrats on a job well done. I noticed you painted your mast. It looks like wood from a distance, I might have to paint mine after seeing yours. Was it hard to get the paint to stick to the masts? Where did you launch for trials? I'm not far behind...

Roger in Ft.Worth

Posted

Roger,

I roughed up the aluminum mast with 60 or 80 grit sandpaper the used Rust Oleum sand color spray paint. See you on the lake when you finish. I've been to two Ray Roberts and Lewisville already-they are both about the same distance from my house -about 10-15 miles.

Joe, As to the your question I'm glad to be done with the build stage. It took me 1.5 years, I never had enough large periods of time to work on it consistently and was always trying to squeeze in time. My daughter accused me of escaping a few times to the boat shop and thus her name for the boat. The workmanship suffers somewhat from this lack of quality time but I really like the CS design. This is my 3rd boat. First a Stevenson's Skip Jack, then CLC kayak which was probably my best as far as the craftsmenship and now the CS 17. Now I'm ready to spend my free time sailing instead of building.

Posted

Tim,

Great job on you boat. I like the way the open stern worked out. That is what I plan to do also. You are an incentive for me to get going again. I went 3D almost a year ago but have not progressed since then. My wife has been sick so have not had time. She is now doing better. Also, 4 hurricanes slowed progress with evacuations, etc. I am retiring on Nov 30th so hopefully will then be spending full time on it. No need to apologize for your craftsmanship. Hey, you are sailing that is what is important. Send us more pics. Some of us need the incentive.

Dale

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.