jaxsailr Posted July 12, 2018 Posted July 12, 2018 Some of the glass has delaminated off my main tabernacle. I suspect the screw holes and end grain not being glassed may be the culprit. The wood surface still seems to have a little bit of epoxy coating it. My plane is to sand and reapply glass. Should the edges be grounded more so I can glass the end grain? Quote
Chick Ludwig Posted July 12, 2018 Posted July 12, 2018 Could it possibly been laminated with polyester resin instead of epoxy? 1 Quote
Hirilonde Posted July 12, 2018 Posted July 12, 2018 What ever you decide to do, you must remove everything that is compromised in the slightest. I would just do that first, then ponder my problem. Quote
jaxsailr Posted July 12, 2018 Author Posted July 12, 2018 The builder used epoxy. Maybe the lamination was to dry. And not glassing the end grain allowed the wood to swell. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.