mitchmellow Posted June 25, 2013 Posted June 25, 2013 Jeff, I received your "recycled" fabric last week. Thanks for the quick service and generous measurements. To my surprise, the cloth width measures almost 67 inches. I have it push-pinned to the hull and it reaches around the widest point with enough extra for "rolling". If you remember, I'm working on a FreeB 14 which is probably your widest design. There was a second blemish near the edge of the cloth but with your generosity I was able to situate it such that the blemish will be cut off or at the least be inside the coaming when sewn. Thanks a bunch! Quote
Kudzu Posted June 25, 2013 Posted June 25, 2013 I have to admit I have not measured the width but the edges are never usable so the actual width is usually wider than the usable width. Flaws aren't too common but when they happen I usually just roll it off and measure behind it, giving the extra to the customer. I am just going to scrap it and they might find a use for it. Glad it worked out for you. Quote
Hirilonde Posted June 25, 2013 Posted June 25, 2013 Flaws aren't too common but when they happen I usually just roll it off and measure behind it, giving the extra to the customer. I am just going to scrap it and they might find a use for it. He makes this sound good guys, but really he is too lazy to throw it away himself Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.