Jump to content

Recommended Posts


Posted

Beautiful job!  I really like the "wrong way" grain on the coaming.  I'm also impressed with the fact that you kept track of the hours even when you worked in small increments- that's good info. 

So you went for the topping lifts right away?  How do you like them?

Posted

Scott said

So you went for the topping lifts right away?  How do you like them?

I like topping lifts on any sail dropped with halyard- stops the boom crashing onto the deck/coaming when dropping and when reefing. They are a single line from the mast head with a snap hook to attach to the adjustable portion on the boom. They clip onto a fitting on the mast for trailing.

post-0-129497639507_thumb.jpg

post-1007-129497688275_thumb.jpg

Posted

Congratulations Wild Cat.  You are an inspiration to those of us still in the shop.

Peter did you go with the 3 degrees of rake on the masts?  Trying to get an idea of what that looks like over the length of the mast.

Posted
Peter did you go with the 3 degrees of rake on the masts?  Trying to get an idea of what that looks like over the length of the mast

Yes she has the standard 3 degrees of rake. Here's a photo during the build from directly side on- the rake is pretty clear.

post-0-129497639507_thumb.jpg

Posted
Thanks for view.  Any idea of the purpose of the angle?

Traditionally, adjusting rake was a way to improve sail balance on a new boat- shifting the CE of the sail plan either forward or aft as needed. I suspect on the Coresound it's mainly for looks- ie the balance is right with a little rake and it's aesthetically good.

Cheers

Peter HK

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.