Jump to content

Recommended Posts


Posted

Well, let's see here.

It handles a 'chop' ok. The water got rougher, the longer we were out yesterday. Waves were just starting to break on their tops (white caps). Could only go about 8 MPH in that. Earlier, and in the protected areas, the water was a bit smoother and we were able to get to 25 with no problems. Old original Airguide speedo worked great! Only had to clean a piece of kelp off once.

That convertible top was real saver for sure. Rounding one of the islands, we had spray coming over the bow and dousing the windshield (I like those little manual wipers). The top also keep us warm and out of the wind, though the spray did soak the rear seat area.

Launch went well, I have to re-work one thing one the trailer, no big deal. Slight noise with the motor that I couldn't isolate. I took it to the service shop on the way home and they found a spark plug that was possibly not tight enough (they did the service). We will have to wait and see on that one.

Pictures to follow..

Posted

She sat true to the waterline. I took rough measurements before stripping the paint and then transfered those lines back on. She listed slightly to port due to battery placement.

e9beb746.jpg

It started out partly cloudy and quickly got darker during the day. Here is my Grandson and Son in law. My Grandson had a ball! :)

e9beb73d.jpg

Before the chop got worse. ;)

e9beb73c.jpg

e9beb735.jpg

I have to admit, I think I may like power boating more than sailing after yesterday. ;) I had a little more control over my destination.

5 hours and a tad over 6 gallons of fuel.

Posted

I think it would be easy to make it there. My docking skills need a LOT of improvement though! It doesn't turn as easy as the Weekender. :shock:

I should add that I had several very positive comments at launch, retrieval and a break at one of the marinas. One fellow I talked to for quite a while. He asked me all sorts of questions and said everything looked really good. It turns out he is 'the' local surveyor! I also asked him about the use of the SS fasteners in place of the original steel (or galvanized, not sure which) fasteners. He said it will all be fine as I covered the outside with Dynel/epoxy and coated the interior with epoxy.

Posted

WOW did that ever turn out way cool! I'm afraid I may have lost a sailing buddy now that you can get where you want to go quicker. It will really broaden your cruising range and open up entirely new places to explore as well as being able to include the rest of the family in the fun.

What a wonderful restoration. Found a nice trailerable cruiser you might want to look at now. :wink:

Posted
WOW did that ever turn out way cool! I'm afraid I may have lost a sailing buddy now that you can get where you want to go quicker. It will really broaden your cruising range and open up entirely new places to explore as well as being able to include the rest of the family in the fun.

What a wonderful restoration. Found a nice trailerable cruiser you might want to look at now. :wink:

I'm listening...... :);)

We'll still go sailing, though I am considering, dare I say, selling the Weekender?

Posted

Jake,

She even looks better on the water.

Powerboaters tend to have a little more control over where and when they go, but the accomplishment of SAILING to a place still wins, in my mind.

Keep up that pretty work. You done us proud!

Steve

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


Supporting Members

Supporting Members can create Clubs, photo Galleries, don't see ads and make messing-about.com possible! Become a Supporting Member - only $12 for the next year. Pay by PayPal or credit card.




×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.