Questions about Curlew Coaming

[Douglas Jacobs]

Ten years after purchasing plans for Curlew, friends and I have finally finished lashing the frame together enough to remove it from the strongback.  My problem is that I've misplaced or lost the full-sized plans for the coaming.  Is it possible to build a laminated coaming from the offsets in the book?  If so, are the measurements to the inside of the coaming?  And, what height should the wood strips be?  Probably I haven't asked the right questions so answers to questions I should have asked would also be appreciated! 

[Hirilonde]

3 hours ago, jacobs said:

  Is it possible to build a laminated coaming from the offsets in the book?  If so, are the measurements to the inside of the coaming?  

I did, so yes. Yes, it is the outside of the mold which is the inside of the combing.

[Douglas Jacobs]

Thanks!  

[Kudzu]

I have to assume you are not getting my emails?  I think you have emailed me twice and I have answered both.

[Douglas Jacobs]

Jeff,  

 

My apologies.  Your emails were going into my junk folder, so I will fix that asap.  Thanks for the info in the emails!