Jump to content

Recommended Posts

Posted

After much fussing and fuming about time to be spent on various other projects, finances, and the worthiness of any end result my meager skills will produce, I have just returned home from the lumber yard with the long material for the keel laminations and to rip into the battens. Strapping all that on top of the Subaru and hauling it back to my abode in the woods was an adventure, but we arrived intact. I got a good price too, thanks to Cap'n Jake who put me onto Puyallup's Building Material Outlet. The 1X12s are not perfect, but for $1.00 a foot, I can work around the biggest irregularities. They didn't have 1X6 at 16' for the battens, but a pair of somewhat nasty 1X4s will produce the same end result with just a bit more sawdust and some kindling for next winter left over.

Anyway, looks like we're on the way to another Weekender here. Guess that visit to "Fire Escape" was all it took.


Posted

VERY NICE!!! :) i am glad to hear you have taken the plunge!! Check out their hardwood stock on a regular basis. It changes frequently. All of my bright work was purchased there (and you can't tell it was close out stock). :)

Right on Steve! Let me know if I can be of assistance, though I might not be available until the rain starts! :):D

Posted

Hurrah, another decision made. The Northwest Fleet will gain another member.

Steve,

I think you are going to enjoy this. Yes,it will be frustrating now and then. And you are going to want the "moaning chair". If Jake isn't thru with his, I have one you can use and pass on to the next builder. :lol:

If I can help, give me a holler too. I know it is a bit of a drive to Orting, but so what. :wink:

Guest Anonymous
Posted

Congrats, Steve!

Well, Folk,,,,It's a Keel! After a full year of shuffling funds to cover one disaster or another, (truck work, car work,, teeth work,,, etc.) I finally decided,,,if I don't start,,,I'll never get it built. So, last weekend I made a trip to Capitol City Lumber, here in Raleigh, NC, and purchased some Kimberly Bay Pine,(absolutely clear, absolutely flat, absolutely gorgeous stuff), hauled it to the shop,,,cleared some space and started lofting. Due to the 95 deg. temps,,,the shop booted me outta the door after getting one full keel layer cut. That was Saturday. Sunday, made a trip to the beach,(hmm,,,this is a different looking sunblock,,,((read "accelerator")) and three days of sitting in my recliner in my drawers because under NO circumstances could ANYTHING come in contact with my chest, stomach, thighs or feet!!!owwwwww

Okokok! Sooooo,,,today,,,to the shop,,,(hearafter to be known as "The Oven"),

I finally learned the joys of working with Weldwood Plastic Resin Cement ("pot life" and "working time on wood" are two MAJORLY different things!_ However, sweat soaked, sawdust covered, back-ached, fingers stuck,,,I still managed to climb into my truck afterwards with a giant smile on my face! It Is KEEEEEEL! Remod Weekender "Dulcinea"

Posted

Thanks, Barry and John, for your kind offers of assistance. It's good to know I have experts handy both on-line and within a reasonable distance if anything gets too hairy.

I suspect progress here will be of the slow and steady type. Inga will not be working for the next year or longer, so that takes a big bite out of the discretionary-funds department. Also, I had a decent callback last night and if I get cast in "Odd Couple" that will take a bite out of time. In the spring, "Camelot" comes along. Oh, well... Puget Sound isn't going anywhere and I've lived without a sailboat since about 1978 so I guess a bit longer won't hurt.

By the way, Barry, would it be possible for me to run up to your neighborhood and get a look at Spirit Wind? Seeing John's Fire Escape was a huge help in envisioning what I'm headed for and comparing different interpretations of the same concept couldn't hurt.

Posted

Steve,

I would love to have you look at my ready to glass Weekender "Spirit Wind". It is hanging on its side from the rafters in a storage unit until the eye Dr. says it is OK for me to go back to work on it. So it is a little difficult to access. That was the only way that my kids could be relatively secure in the knowledge that I wouldn't be trying to do things that I'm not supposed to be doing right now. Hopefully the next surgery(s) will go as planned and the results will be as hoped. Then I should be able to get back to work on it later this fall. Ready for Spring launch.

Posted

Sounds perfect, Barry. Seeing the boat in pre-glass mode should give me a good idea of how things went together before everything gets covered up by finish. Let me know what's a good time for you, as my time is incredibly flexible for the next week or so.

Posted

I thought I had registered a long time ago,,,,but went ahead and registered. Sorry :oops:

Ever since I first accidentally found The Weekender on the web, I followed every link there was. I've followed the various builders forums, and website updates. I can't thank All Y'all enough for the help you hand out to everyone with your posts and your websites! I hope to continue that tradition. http

://home.nc.rr.com/remodsshop

Remod

Posted

Remod

It is addicting. I started like you and found I had to have one of these boats. It is a fun project that you will never be finished with. I am looking to see what my next project is going to be. Once you get started you cannot stop.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


Supporting Members

Supporting Members can create Clubs, photo Galleries, don't see ads and make messing-about.com possible! Become a Supporting Member - only $12 for the next year. Pay by PayPal or credit card.




×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.