Jump to content

What type of Seat/Locker did you build or are building?  

18 members have voted

  1. 1. What type of Seat/Locker did you build or are building?

    • Side Access with Hinged Doors (as per plans)
      5
    • Side Access with No Doors
      3
    • Side Access with Sliding Doors
      1
    • Top Access with Flush access panel
      2
    • Top Access with entire top hinged
      0
    • Seats without Lockers (open below)
      5
    • No Seats, using a cooler
      0
    • Other, See notes below
      3


Recommended Posts

Posted

Since there has been such a discussion on the Lazarettes, Seats, and Lockers, I was interested in what everyone thought of their seating arrangement and locker access.

Please take the poll, and the second poll in the next topic.

Thanks,

Phil


Posted

Had to pick "side access with no doors", but it wasn't by design. I found after glassing the hull that my seat sides were twisted, making inset doors hard to fit. I would have had to have two latches on them, and decided to go without doors instead.

It works pretty well; I've never had anything roll out of them!

Posted

I've gone with the open side access holes and no doors. If rain gets in those spaces (it will), I'll have some Sunbrella covers made that snap on over the openings. That should provide easy access and keep out 99% of the rain water.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.