bfeller Posted December 8, 2010 Posted December 8, 2010 Unfortunately for me the jug leaked onto the stack of plywood that had been cut out for another Moccasin. I'm not the expert, but I don't think this wood will glue up. Quote
PAR Posted December 8, 2010 Posted December 8, 2010 Yes it will glue up, given a little prep. Naturally, you need to wipe up any excess oil. Next, using a fairly "rich" mixture of Tide laundry detergent in a bucket of water, as warm as your gloved hands can tolerate, scrub the surface with the Tide. Use a scrub brush with medium soft bristles so you don't tear out any wood. This needs to dry, which can be expedited with a hair drier or heat gun on the low setting. Lastly, wash the surface with a very well soaked rag of acetone a few times, which will suck out the last of the moisture and any remaining oils. The acetone bath will flash off quickly and you can move directly to epoxy, primer or what ever. Of course this all assumes the wood has dried to reasonable levels after the wash down. Quote
tom151 Posted December 8, 2010 Posted December 8, 2010 Unfortunately for me the jug leaked onto the stack of plywood that had been cut out for another Moccasin. I'm not the expert, but I don't think this wood will glue up. EDIT: Sounds like PAR is speaking from experience... so I'll remove my guess work. Quote
PAR Posted December 8, 2010 Posted December 8, 2010 Oil wood stain isn't much different then gear oil. It has some pigments and some solvents to thin it out and I suspect a more refined petroleum molecule (higher up the cracking tower), but essentially it's still really old dinosaur guts. Quote
bfeller Posted December 9, 2010 Author Posted December 9, 2010 PAR, Thank you for the explanation. I did not expect that it would be possible to salvage the wood. Brett Quote
PAR Posted December 9, 2010 Posted December 9, 2010 Okay, better yet, it's ruined, yep absolutely no good at all. In fact, now that you have petroleum products all over it, you'll need to dispose of it as hazardous materials, probably costing you tons of money when the EPA finds out about it (I'll call them . . .) So, to save you the difficulty of properly getting rid of this worthless stuff, I'll take it off your hands, because this is the kind hearted soul I am. I'll come over, pick it up (free of charge, because that's the way I roll) and dispose of it in a safe and environmental friendly method. Quote
Gordy Hill Posted December 9, 2010 Posted December 9, 2010 I'm getting all teary-eyed! Par, you're all heart! ...Must be the season.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.