catspaw 8 layout question

[roam]

In the attached photo I'm not sure what the 42&7/16 measurement is referring to. Should this be 82&7/16" from the edge of the sheet?

 

Thanks,

Hugh

[roam]

Taking measurements off the plans I got 85" for the end of the center seam. I think the42 &7/16" may be from the center so I'm going with 84 & 7/8".

 

 

[Alan Stewart]

Hey Hugh, 

Sorry that this held you up. 84 7/8" is correct. Thank you for pointing out this typo. It was off by a factor of 1/2 likely from using the wrong dimension settings. 

 

That error hasn't come up until now because you're building the first Catspaw 8 since I updated the cutout sheet in 2020 to match the new 3d model so the parts should be more accurate. I double checked the rest and didn't find any other dimensions like this that were off by half. I'm glad it was so obviously off that it presented itself. 

-Alan

[roam]

Could you check the dimensions of the center frame. I've double checked my angles and lengths of parts but the totals are off by quite a bit.

 

[roam]

Nevermind I found my error.