Noklin Posted November 28, 2009 Posted November 28, 2009 While doing the finish sanding on my CS20 prior to painting, I managed to sand down to the epoxy at the shear line edge. I used the System 3 water reducible LPU primer and intend to use their LPU topcoat. My question, what is the best method of recovery? I am out of the System 3 primer. Can I use a water based primer to touch up the bare spot and still cover with the LPU topcoat? Can I paint over the bare spot with the LPU topcoat and expect it to stick? If possible, I would prefer not having to order more LPU primer. Quote
PAR Posted November 28, 2009 Posted November 28, 2009 Yes, if it's a fairly small spot and you haven't sanded through the epoxy sealing the wood, you can topcoat right over it. It'll take a little more paint in this area to cover the color difference, but you'll be fine. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.