Marcelo_Lopez Posted March 16, 2009 Posted March 16, 2009 Hi, I'am Marcelo from Argentina, I need plans for build a trailer for my Vacationer (http://www.mibarquito.blogspot.com). Be grateful for any help in this point. Quote
Barry Pyeatt Posted March 16, 2009 Posted March 16, 2009 https://www.boatdesigns.com/products.asp?dept=529 This is a good way to build your own trailer. Glen-L has had at least hundreds of trailers built from their plans. And they are cost effective. Quote
Craig Posted March 17, 2009 Posted March 17, 2009 Glad to see they have updated this. The last time I looked at it they still had the wooden trailer listed. This is a great resource for the fresh water guys. Thanks Berry. 8) 8) 8) Quote
Marcelo_Lopez Posted March 17, 2009 Author Posted March 17, 2009 Thanks Barry, Glen-l have a lot of plans and the price is low. I want any trailer which was tested in a vacationer, I 'am worried about the axis position. Is can see several pictures from stevenson's boat trailers without concordance in this point. The vacationer need two stringers for keel and bottom support and this is not included in tradittional trailers. Thanks by your response. Quote
Konrad Posted March 18, 2009 Posted March 18, 2009 Marcelo, Are you asking about the location of the trailer axle? I can go out back and measure mine tomorrow if that's what you're looking for. Konrad Quote
Marcelo_Lopez Posted March 18, 2009 Author Posted March 18, 2009 Yes Konrad, thanks!!! Excuseme by my poor english ;D..... Quote
Mike Pennington Posted March 20, 2009 Posted March 20, 2009 Here are a couple of pictures that might be of use Quote
Konrad Posted March 26, 2009 Posted March 26, 2009 Marcelo, I apologize. I completely forgot about this question. I went out tonight and took the measurement for you. I don't know if Argentina uses Metric or SAE, so I'll give you both. From the bottom of the transom to the center of the axle is 8ft 9 inches. That's 2.64 meters. (Check my conversion to be sure it's correct). I measured from the bottom outside corner of the transom. I believe the center of gravity of the Vacationer is approximately 9ft 0 inches That's 2.74 meters. I remember working this out in the shop 9 years ago. I balanced the boat upright on a round piece of pipe under the keel and rolled it forward and backward until I found the balance point. Quote
Konrad Posted March 26, 2009 Posted March 26, 2009 One more thing I will add: My trailer is not as long as the boat. The last meter of the boat hangs over the back of the trailer. Nothing about the trailer needs to be exactly perfect. The Vacationer doesn't weigh very much. It's under 400kg. In all honesty: NOTHING AT ALL on these boats needs to be perfectly measured. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.