Jump to content

Recommended Posts


Posted

The Stevensons bult a removable cabin Weekender in Hawaii that is in their Project pages.

Here is one from the Arizona area.

http://www.messing-about.com/forum/viewtopic.php?t=2047&highlight=

Bill Paxton has done a beautiful job on his in Minnesota.

http://www.stevensonprojects.com/WkndrBBB11.html

Karl Nisson is building an open Weekender in the SouthEast.

There have been some others as well. Most just don't attach the cabin and install a coaming around the cabin areas. They cut down the main bulkhead and install seating inside the cabin area. You would need to keep the main bulkhead and the forward bulkhead to retain integrity of hull and it would be a good idea to keep the side decks, lazerette and rear deck as well since these contribute significantly to the overall strength.

Several of the builders have built with smaller cabins by either building a bridge deck over the upper portion of the main bulkhead at the height of the seats and then fabricating a smaller cabin forward of the main bulkhead; or,

building with the main bulkhead just a bit forward of the existing location.

Capt. Jake's Fire Escape is one of these that the main bulkhead had been moved to the panel joiner in the bottom which extended the seating by several inches and shortened the cabin length. It works out well for additional cockpit space and gives two people room to stretch out a bit. But is still a bit crowded for more than three.

http://www.messing-about.com/forum/download.php?id=1185

Posted

I think I saw that he will be involved in a messabout in the near future on here, if you wish to see it while your hull is in the building process..

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.