dutch ob 20

No gym for me tonight ? 20190105_144614.mp4

The first layer of filler

Finished with the fabric

Now the side

Now the other side

The first side covered with fabric

A happy "boat building" new year jan

Extra glass fabric over the keel and two test pieces with the hybrid fabric

The bow is also covered

Progress

The back planked and now to the bow

Thank you Carter and I keep posting photos on the forum

Hi With some help from google translate (; I have read your reflections and advice and this is what I have done so far Before I put the plywood on the hull, I provided the inside with a thin layer of glass fabric (100 gr/ m). So the bodum is from the inside out glass and 9 mm plywood The side is made of two layers of 4 mm plywood with a layer of glass on the inside of each layer And this is what I intend to do with the outside My hybrid fabric is 120 cm wide and I can overlap at the keel and the chine flats and then have two layers of 190 gr / m in those places and I think that is strong enough

Hi Lenm I have enough experience with epoxy with glass fabric but not with a hybrid fabric Do I first have to coat the wood with epoxy than to apply the fabric in the wet epoxy and then a layer of epoxy coating Or can the fabric on the (no wet epoxy) wood and coat through the fabric on the wood Dutch 20 OB

I bought carbon-aramid fabric for the outside. Someone experience?

Progress

And I bought a piece of mahogany

And now the other side

First side planking

Ready for the side planking 20181123_122716.mp4

Now the other side

Bend with steam

Next one

A bit further ......

Today the chine flat glued in place