Mixing Q-Cells/ microballons & resin tip

[oceansky]

G'day Everyone,

Some of you are approaching the time (if you haven't aready), to start bogging your boat ready for fairing or / mixing glue and Q-cells together for squeeging between the planks, or whatever.

No doubt, you've found when mixing the bog powder or Q-cells with the resin, the powder seems to "float" on top of the resin when mixing and everywhere else as you seem to spend ages trying to mix it together.

Here's a hint:

Using a margarine or icecream container, mix up the resin and hardner first. Then grab a hand full or three of Q-cells and throw it into the container. Put the lid on the container and shake like mad for around 10 - 15 seconds, then open up. Its basically mixed together. Now you can grab a stick and give it a good solid mixing without the Q-cells floating on top of the resin and floating up into your face. If more Q-cells are required, repeat the process.

Save's time and also a mess.

TOO EASY !!

have fun

Regards

Mark