Fintan Murphy Posted March 19, 2003 Posted March 19, 2003 Hi All, there does not seem to be any measurement for the rear eyebolt on the boom in the plans. It's the one that the main sheet goes through before going forward to the final eyebolt and pulley. I also need the measurement for the eyebolt that holds the rear lower corner of the mainsail to the boom (tack?) Anyone got the measurements that they used ? Quote
Johannah Posted March 19, 2003 Posted March 19, 2003 "Rear corner" indeed! Fintan, the point of the sail fastened at the aft end of the boom is the clew. If you are not rescued soon by others who actually answer your question instead of picking on you (which is more fun), I will unearth the plans and notes. Plans may be vague because most people seem to have done things a bit differently at this point (i.e., adding an outhaul). Quote
T. Nelson Surbrook Posted March 19, 2003 Posted March 19, 2003 I set mine about 4 inches from the end of the boom. The actual placement is not too critical, it just need to br aft of the clew. Quote
Fintan Murphy Posted March 20, 2003 Author Posted March 20, 2003 Johannah, sorry 'bout that, I hang my head in shame. I've been out of the water for too long. I'ts been a year and a bit, and will be a bit more. Of course, I could have looked it up (note to self - don't be so lazy the next time) :oops: Quote
Johannah Posted March 20, 2003 Posted March 20, 2003 No fair, Fintan. Nothing worse than remorse to shame the meany (me). I was just busting on you for fun because Jake hasn't provided any good opportunities for a while. Remember, I'm half Irish (and the other side is almost as bad) and my mother marched us to the dictionary for language infractions the way some people were marched to the wood shed for misbehaviour. Good luck with the boom. Meself, who absolutely never, ever, ever uses the wrong word 8) Quote
capt jake Posted March 20, 2003 Posted March 20, 2003 You noticed that I stayed out of this one! Though I have everything done; I have not drilled the suspect holes! I will wait until I have sails in hand to do that. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.