Joe Nelson CS#35 Posted January 27, 2003 Posted January 27, 2003 The plans call for a tollerance between the board and case. Is this the total tollerance or tollerance for each side of the board? (no less than 1/16th and not more than 1/8th) Quote
Guest Graham Posted January 28, 2003 Posted January 28, 2003 It is the total tolerance. The reason that we word it like that is after you glue up the board, shape and then glass it, the board may be thicker or thinner than spec. It is easy to adjust the king posts so that you have the right clearance. Graham Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.