I think this initial writer has described my retirement plan to a "tee". I still am at least 15 years or so out from this because of my 17-month old daughter. That is why I peruse this web site, building may be my best option.
I hope to get a jump on things and start sea training of wife and daughter when she gets old enough to handle her own kayak or canoe. I project at 10 years old or so, which is not that far off. I met a couple in their sixties at Fort Jefferson-Dry Tortugas whose two teenagers were some very apt seaman ( a boy and a girl ) during the passing of a low pressure system, where the dragging large vessels were a threat to all of us who could actually set an anchor. The 3 of us were out in dinghy and runabouts at 2 AM setting other's anchors to save our own vessels.
I too dreamed of offshore trips but I think I'll just "container ship" any vessel if I want to leave the New World, so that sets a length limit of no more than 40 feet. But I also think coastal cruising of the Americas could easily occupy a 20 year retirement lifetime.
I like the lines of the Princess as well, but I am not yet convinced about plywood wood-epoxy construction. Yep, I have read Pardy's chapter on adhesives and he is very persuasive. I will have to practice on a small kayak or two first before being convinced.
Anyhow, I think in the long run all boat cabins end up being very small, standing headroom or no, if stuck down below for any length of time. So sitting headroom it is because it opens up to us more extreme shallow draft options. We'll see if the wife will concur. Life during the day is out and on the deck, anchor, dinner and stargazing for a bit, sleep, up at dawn and on our way, the heat rolls in fast in the AM in the summer months.
I too am one of those Fla. skippers and the old adage is true about two types of skippers. "Those that have run aground and those that are about to run aground." A darn keel pointing straight down means I never can leave the channel without great trepidation. 18 to 24 inch draft is worth any sacrifice. Even 4 foot was deep for most of fla outside the intracoastal markers.
I like the Frances design as the Bahamas and Cuba become possible. I liked the Ruell Parker designs, particurlarly the TERRAPIN 34, but we're back to the faith in epoxy bonding. Princess is great and a strong possibility, but back to epoxy and now plywood with water or any intrusion damage that can run the length of the laminations. I also like the external keel strip rather than all internal ballast, like MEADOW LARK.
The twin bilge keels where the boat rests on the bottom upright is pretty nice, as well. But seems to be a complex construction method.
Tabernackles are a requirement because of the channels and waterways I have in mind, with a nice powerplant. Leaning towards the outdoor motor well, because it just makes repairs and maintenance so darn easy.
I think I am settling on the L Francis Herreschoff MEADOWLARK adapted to mast tabernackles and outboard motor well or the PRINCESS to allow trailerability.
I just have to get convinced on epoxy or adapt the construction methods to the rescorcinol Pardy speaks of. Trying to get any of the designers in epoxy to adapt their methods to this other glue construction, that may prove a task in and of itself.
Just some ruminations on my "ideal design."