Jump to content

Sign in to follow this  
chrisjk

bandsaw motor

Recommended Posts

Please, guys who can give advice about the bandsaw. I bought JET bandsaw  (JWBS-14DXPRO 14")

It was sold without the motor because the former owner burnt it. I saved some money on the bandsaw, but now I should buy electric motor. I want to buy a good thing.

I do not understand according to what technical characteristics I should find it.

Maybe somebody has the similar model of bandsaw.

Please, share your experience  

Share this post


Link to post
Share on other sites

Welcome to the forum.

 

If you have the old motor, you can rebuild it pretty cheaply (capacitors, bearings, brushes, etc.). If you don't you'll need a 1.25 HP motor. The motor that came with your saw is "face mounted" (I think), so the same style of mount is necessary. If you buy the motor from Jet, you pay through the nose for it. It's part number JWBS14DP-94 and costs in the $350 range. Are you sure it the motor is "burned up" as it's a capacitor start/run motor and replacing a capacitor is a one screw, two spade connector type of thing (really easy).

Share this post


Link to post
Share on other sites

Let's see, you want to replace a 1.25 HP motor with a 1/2 HP motor, hummmm I don't think this will work well for you. Go to the Jet site, get the specs on the motor and see if you can find a suitable replacement. Make sure you match RPM's too. Check surpluscenter.com for suitable motors.

Share this post


Link to post
Share on other sites

Northern Tool and Harbor Freight, sell literally junk. If you'd like a noisy, sloppy shaft that uses more watts, than it's supposed to motor, then you're in luck with motors from these two outfits.

Share this post


Link to post
Share on other sites

Agreed. The only decent things in harbor freight are c-clamps. Never seen a good power tool from there.

If you live in or near a city, there is an electric motor shop. Make friends, bribe them with beverages or doughnuts or whatnot, and get a motor from them. Money stays in your area, and you have a good resource for next time...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  


Supporting Members

Supporting Members can create Clubs, photo Galleries, don't see ads and make messing-about.com possible! Become a Supporting Member - only $12 for the next year. Pay by PayPal or credit card.




×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.