Chick Ludwig Posted November 5, 2018 Report Share Posted November 5, 2018 Lookin' super! Let's go sailing! Quote Link to comment Share on other sites More sharing options...
Paul356 Posted November 7, 2018 Report Share Posted November 7, 2018 vc17 is the way to go in fresh water. the progress looks great. Quote Link to comment Share on other sites More sharing options...
Capt Bones Posted November 8, 2018 Report Share Posted November 8, 2018 Sweet! Quote Link to comment Share on other sites More sharing options...
Steve W Posted November 14, 2018 Author Report Share Posted November 14, 2018 Shes coming out Saturday morning. .... it's all lined up. She's painted (pics soon) and a new basement door is waiting to be put in. Sawzall and Vaseline might be required! 1 Quote Link to comment Share on other sites More sharing options...
Chick Ludwig Posted November 14, 2018 Report Share Posted November 14, 2018 YAY!!! Hope ya don't need the Sawzall! I heard of a guy once who actually built a boat in his living room and had to cut a hole in his wall to get it out. Quote Link to comment Share on other sites More sharing options...
Steve W Posted November 18, 2018 Author Report Share Posted November 18, 2018 Well it didn't happen. I got a nasty cold that had me horizontal for four days and then we got over a foot of snow Thursday night. So I postponed the extraction until the Sunday after Thanksgiving. I'm still not 100% so we will wait. Since the soonest I could launch is mid April or later we aren't going to rush it. Quote Link to comment Share on other sites More sharing options...
Paul356 Posted November 19, 2018 Report Share Posted November 19, 2018 Best wishes, whenever that extraction may be. Quote Link to comment Share on other sites More sharing options...
Steve W Posted November 26, 2018 Author Report Share Posted November 26, 2018 Ok, the extraction. Here is the problem: https://youtu.be/SJ19FXosRio Quote Link to comment Share on other sites More sharing options...
Steve W Posted November 26, 2018 Author Report Share Posted November 26, 2018 And here is the solutions! She's out! 1 1 Quote Link to comment Share on other sites More sharing options...
Designer Posted November 27, 2018 Report Share Posted November 27, 2018 Congratulations Steve. It is great to see her outside at last. What people do not understand is that if you have what it takes to get this far you surely have what it takes to get the boat out. At the beginning, it reminded me a little of that old British song from the 60's, just kidding but it is fun. 1 Quote Link to comment Share on other sites More sharing options...
KevinB Posted November 27, 2018 Report Share Posted November 27, 2018 Steve I've heard Doug play that song. Talk about ironic.... Quote Link to comment Share on other sites More sharing options...
Steve W Posted November 27, 2018 Author Report Share Posted November 27, 2018 When I first saw the CS20.3 3D drawing I was smitten. But I knew that building it outside wasn't a possibility and my shop door was only 47". I scaled the early drawings and determined that the height dimension was possibly less than 48". I drove to Tennessee on the way to Florida to measure Doug Cameron's boat and sure enough, as best as I could measure it was about 46.5" without the shoe keel. I figured if need be I could get my Sawzall. But upon returning home I all of the sudden realized I had that support beam, so again, I made a sort of profile template and laid it on it's side and figured the sewer pipe might need to be removed. Later in the build while I had her upside down I just went ahead and through caution to the wind and glued the keel on. That put her over the edge. When we shoved it through the shop door, there was less than 1/2" in the 48" rough opening. I'd removed the doors and frame ahead of time. We may have not needed to move that support beam, but my nephew Patrick, who builds timber frame homes for a living, just decided that nudging it out of the way was easy enough. All in all, it was out in about two hours. The best part was all the folks who came over since she was 3D and tried to convince me there was no way it was coming out. I'd read that Craftsmanship and stubbornness are the same thing and I don't think that is far off. She was coming out one way or another. I have a bit of shop cleanup, drywall repair (oops), but she's out! I now have room to build the masts and sprits and rub-rails. Everything else is done. I may glue the tabernacles in tonight. She looks way bigger out of the shop and I forgot how convenient having her sitting on the keel blocked up in the shop was. She's a lot taller on the trailer. Graham, that video really was sort of how things started. And Kevin, it doesn't surprise me at all Doug plays it....... Life is good. Quote Link to comment Share on other sites More sharing options...
Chick Ludwig Posted November 27, 2018 Report Share Posted November 27, 2018 And here I was afraid that you'd have to jack the house up to get it out. Quote Link to comment Share on other sites More sharing options...
AmosSwogger Posted November 27, 2018 Report Share Posted November 27, 2018 Impressive work. Enjoyed the videos, congratulations Steve. Take a day off and celebrate. Quote Link to comment Share on other sites More sharing options...
Steve W Posted November 27, 2018 Author Report Share Posted November 27, 2018 1 hour ago, AmosSwogger said: Impressive work. Enjoyed the videos, congratulations Steve. Take a day off and celebrate. Funny you mention that Amos. I played football (delayed Thanksgiving turkey bowl) in the snow Saturday with a bunch of relatives and then this all happened Sunday. I was in bed by 8 o clock Monday night and slept right through until 7am this morning. But I'm rested and ready to clean the shop tonight and probably do some gluing. Quote Link to comment Share on other sites More sharing options...
Paul356 Posted November 28, 2018 Report Share Posted November 28, 2018 Congratulations. I watched the video twice and still not sure how it all happened. But it did! Quote Link to comment Share on other sites More sharing options...
Dale Niemann Posted November 29, 2018 Report Share Posted November 29, 2018 Congratulations Steve !!!! She is a beauty !!!! dale Quote Link to comment Share on other sites More sharing options...
Steve W Posted December 11, 2018 Author Report Share Posted December 11, 2018 After the extraction I got her up in the garage. And then I spent the last two weeks knocking off the honey do list, and finishing the new basement door, the shop door, a bit of drywall damage and then I cleaned all the epoxy drips, painted the shop floor and celebrated how much space there is WITHOUT A 20' BOAT IN THERE! Anyway, I'm going to start building the sprits and masts. But when I was looking at the boat in the light, I am disappointed in the surface of the sheer strakes. Amos said a the messabout that painting was "humbling". I totally agree. The boat overall looks great, but I draped cloth over the cabin top, and cut it nice and even about an inch down from the top at the green stage. On the hull I carried the glass about an inch above the joint and trimmed the same way. On the cockpit, I draped clot over the top to strengthen the joints. I faired in the edge and sanded it good and smooth, but it still looks not so good. Maybe I'm being a perfectionist, but it's bugging me. I'm not one to normally "let perfection be the enemy of good" but this stretch of the boat bugs me. The part that most bugs me is I don't know how to fix it. I am thinking maybe a bunch more high build primer and then a flexible long board, but maybe there is a tip you all can give me. I have all winter and the good news is I can push the boat outside (trailer is really awesome) to sand if necessary. Aggressively sanding when it is 25 outside will keep you warm. Quote Link to comment Share on other sites More sharing options...
frowley Posted December 11, 2018 Report Share Posted December 11, 2018 Hi Steve, Virtually everyone on this site knows more about this stuff than I do, so I'm sure you'll get some great advice. Paint IS humbling, and I totally feel your pain (and disappointment). It is -- not that you'll hear this -- wayyy better than it looks to you. That said, you might think about floating the seams with quick fair, or epoxy w talc and microballoons before laying on another prime coat. QuickFair is much the better option if you haven't tried it. I've become a convert. Then block sand, of course. Personally I don't think it needs to be a long board. I floated stuff like this with a 4-6" drywall blade so I could really get it to feather out. You could blast on high build primer which would eventually do the same thing, but quick fair is a bit more direct and quicker. ('Floating' makes it sound like you'd be laying on gobs of epoxy, but it'll more likely be 1/32" or so, feathered out to nothing, unless you used very heavy cloth.) Fred Quote Link to comment Share on other sites More sharing options...
Steve W Posted December 11, 2018 Author Report Share Posted December 11, 2018 Fred, that thought occurred to me. In fact stitch and glue isn't that much different than drywall! I am familiar with quickfair. Anyway, do you use a metal drywall blade? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.