Chas231 Posted September 29, 2014 Report Share Posted September 29, 2014 Is 3/8" plywood used for the pilothouse sides? I thought I'd memorized the instruction manual, but can't find that measurement. I'm down to one sheet of 1/2" ply. Any big requirements for 1/2" that I should order more? Thanks! Chuck Quote Link to comment Share on other sites More sharing options...
ejds Posted September 29, 2014 Report Share Posted September 29, 2014 Is 3/8" plywood used for the pilothouse sides? I thought I'd memorized the instruction manual, but can't find that measurement. I'm down to one sheet of 1/2" ply. Any big requirements for 1/2" that I should order more? Thanks! Chuck Page 22 showing the side window channel details indicate 3/8" ply. This is on the 25.5 I only used some scrap pieces of 1/2" here and there. Don't think there was anymore requirement for 1/2" Egbert Quote Link to comment Share on other sites More sharing options...
Chas231 Posted September 30, 2014 Author Report Share Posted September 30, 2014 Thanks Egbert. I knew it was there somewhere! I still have the side decks and windshield to complete before I get to the cabinsides - hopefully not too long. Chuck Quote Link to comment Share on other sites More sharing options...
jkeenan Posted September 30, 2014 Report Share Posted September 30, 2014 You can use your 1/2 inch for the motor box. Enclosed or not, you need the athwart ship panel, between the seats and the top section. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.