Jump to content

Greg Luckett

Welding machines??

Recommended Posts

I am wondering which welding machine to buy for my shop, now that I have a 100amp service into my shop.  I stopped by Home Depot last week and there were several to select from.  Since I have no welding experience, but have brazed and soldered, I think the Tig type machines would suit me best.  I would like to be able to weld 1/4 thick steel/iron such as used to build trailers, vehicle body repair, etc. or the thinner sheet metal types of materials.

Any recommendations or experiences as to which machine to buy?

Thanks,

:) 

Share this post


Link to post
Share on other sites

Greg, for light work you will enjoy a tig/ mig type machine. Just a few pointers (1) Keep the feed cable as straight as possible, a sharp kink or bend will break the wire and cause a sudden loss of power while welding. (2) invest in an instant change hood. It allows you to see your target area clearly then blackens in a 1/1000th of a second as soon as the arc is struck. Depending on your choice of wire, and material a shield gas may be required. Most use argon/nitrogen and helium as shield gasses.Helium is the primary choice of gas for welding aluminum while argon/ nitrogen is good for stainless and carbon steels. Get an assortment of small  plates, from 1/4 down to 18 gauge  to practice welding with. On carbon steel the easiest method is the circle puddle where the molten metal is progressed in a series of overlapping circles. Remember that welding is a skill and will require practice to learn, kind of like cutting out  boat parts to a tight tolerance. Sometimes you will need to grind it all off and start over and others it will burn through but with practice and patience you will learn.

Share this post


Link to post
Share on other sites

kormorant2,

I read this earlier but need to thank you for the advice, ergo, THANKYOU! :)

I decided to back off the welding things for a bit until I have time to learn and experiment.  I may take a welding class at the local schools if they ever offer it again.  Most of the adult education classes were killed off years ago for budget reasons....go figure  >:(.

Thanks again. :)

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.