roam Posted July 28, 2022 Report Share Posted July 28, 2022 In the attached photo I'm not sure what the 42&7/16 measurement is referring to. Should this be 82&7/16" from the edge of the sheet? Thanks, Hugh Quote Link to comment Share on other sites More sharing options...
roam Posted July 30, 2022 Author Report Share Posted July 30, 2022 Taking measurements off the plans I got 85" for the end of the center seam. I think the42 &7/16" may be from the center so I'm going with 84 & 7/8". Quote Link to comment Share on other sites More sharing options...
Alan Stewart Posted July 30, 2022 Report Share Posted July 30, 2022 Hey Hugh, Sorry that this held you up. 84 7/8" is correct. Thank you for pointing out this typo. It was off by a factor of 1/2 likely from using the wrong dimension settings. That error hasn't come up until now because you're building the first Catspaw 8 since I updated the cutout sheet in 2020 to match the new 3d model so the parts should be more accurate. I double checked the rest and didn't find any other dimensions like this that were off by half. I'm glad it was so obviously off that it presented itself. -Alan Quote Link to comment Share on other sites More sharing options...
roam Posted July 31, 2022 Author Report Share Posted July 31, 2022 Could you check the dimensions of the center frame. I've double checked my angles and lengths of parts but the totals are off by quite a bit. Quote Link to comment Share on other sites More sharing options...
roam Posted July 31, 2022 Author Report Share Posted July 31, 2022 Nevermind I found my error. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.