The Dali Posted April 26, 2022 Report Share Posted April 26, 2022 hi - for anyone who built out the Marissa 18' center console... we are trying to look at the rigging tube placement and how it exits in the stern/transom to connect with the motor. There isn't anything in the plans that specifies how it emerges from under deck and goes into the engine well. We are planning on running the tube to the starboard side transom "compartment" and using an elbow UP to the compartment and then creating a second elbow to exit through the transom wall and into the engine well. Does that sound right? Or could there be an issue with the rigging making two 90 degree turns? Quote Link to comment Share on other sites More sharing options...
gray duck Posted April 26, 2022 Report Share Posted April 26, 2022 someone with more experience than me will likely be by soon but I think using 45 deg connectors is better for running cables/wires etc Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.36b85485e1bfb696a7af97f02a1c0b30.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.