Walter T Posted February 20, 2021 Report Share Posted February 20, 2021 I started on this working on this FreeB for my grand daughter a year or so ago, had a very bad accident and am now back at it. I have drawn out all of the frames, bow and stern but I see no dimensions for the slot, for the keel, in the bow or stern. Is this something I should just cut in on my own or am I missing something? I also don't see any A dimensions for the keel. Does this mean that the keel should be flat with no rocker? The accident was my own doing. I had built a T14 Martin house and when I went to raise it to the top of a 12' pole, it fell from the very top, struck me on the head, smashed me to the ground, giving me a concussion, wrenched neck and a completely blew my out rotator cuff. All's good now but, I'm a little dizzier than ever. Thanks a bunch Wally Quote Link to comment Share on other sites More sharing options...
andy00 Posted February 20, 2021 Report Share Posted February 20, 2021 Wally: For a better response to your questions, move your post over to the Kudzu Craft Forum. I hope this project proves less dangerous than the martin house. Have fun! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.