Douglas Jacobs Posted February 19, 2021 Report Share Posted February 19, 2021 Ten years after purchasing plans for Curlew, friends and I have finally finished lashing the frame together enough to remove it from the strongback. My problem is that I've misplaced or lost the full-sized plans for the coaming. Is it possible to build a laminated coaming from the offsets in the book? If so, are the measurements to the inside of the coaming? And, what height should the wood strips be? Probably I haven't asked the right questions so answers to questions I should have asked would also be appreciated! Quote Link to comment Share on other sites More sharing options...
Hirilonde Posted February 19, 2021 Report Share Posted February 19, 2021 3 hours ago, jacobs said: Is it possible to build a laminated coaming from the offsets in the book? If so, are the measurements to the inside of the coaming? I did, so yes. Yes, it is the outside of the mold which is the inside of the combing. Quote Link to comment Share on other sites More sharing options...
Douglas Jacobs Posted February 20, 2021 Author Report Share Posted February 20, 2021 Thanks! Quote Link to comment Share on other sites More sharing options...
Kudzu Posted February 20, 2021 Report Share Posted February 20, 2021 I have to assume you are not getting my emails? I think you have emailed me twice and I have answered both. Quote Link to comment Share on other sites More sharing options...
Douglas Jacobs Posted February 20, 2021 Author Report Share Posted February 20, 2021 Jeff, My apologies. Your emails were going into my junk folder, so I will fix that asap. Thanks for the info in the emails! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.