SewerSlave Posted June 7, 2020 Report Posted June 7, 2020 I just applied a coat of Interlux Prinekote on my topside. It didnt lay down as smooth as I expected after applying with a dense foam roller, no tipping. The prep was well done to 220 grit and Im painting the bow and top of gunnels - relatively flat laying surfaces. Is this normal? After sanding, will the Interlux Perfection lay the same without tipping? Quote
Don Silsbe Posted June 8, 2020 Report Posted June 8, 2020 That high-build primer is there so you can sand 2/3 of it away. Its main purpose is to act as a sort of final step of fairing compound, more than to provide “grip” for the top coat. Yes. Sand away. That’s what it is for. It will be lovely. Quote
Mike Vacanti Posted June 8, 2020 Report Posted June 8, 2020 It's also possible that you didn't thin the primer enough. Quote
Hirilonde Posted June 8, 2020 Report Posted June 8, 2020 8 hours ago, Paul356 said: And tip your final. What he said. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.