Finally got a chance to take the canoe out on a real backcountry camping expedition. Needed to create a removable yoke to portage (1KM) on my shoulders. Went superb. I do need a better shaped/contoured yoke, I'll do that this month so that my second trip in September is more comfortable as I will have pretty large hills to portage. I figured you folks might enjoy some pictures of the picturesque lake and the canoe (and fish). And yep the barrel contains all supplies for multiple days including tent etc/
Yoke is made with poplar (like the floorboards) and the hardware is a woodworking cam clamp, and 4in bolts/washers (galvanized steel). And yep I add a backrest seat before I go out to give some back support. Yoke pattern from here. Would not recommend the yoke though, a contoured/deep dish yoke is substantially better and will be my next build for this canoe.
360 shot of campsite: https://photos.app.goo.gl/xsoF9JWFoj4GoDGM8
Thanks everyone for really helping with answering my questions (my many questions!). I promise I post a full write-up summarizing everything I learned as this was my first real woodworking project and post pictures. I just had a few (hopefully final) questions on the stonefly canoe:
I bought WRC - I would like to get the baltic birch ply to match the WRC with a stain - any stains that would make em match? I would prefer to leave the WRC unstained. Or am I just being crazy and I can leave it?
I'm thinking, WRC for gunnels/stringers, baltic birch for frames, ash for seat and thwarts, maybe walnut or cherry for breasthooks - that is a lot of different colours. Is that going to look fine oiled or should I be trying to stain some of it to match?
How thick of a wood is needed for breasthooks?
So I'm just (maybe) staining the wood and then oiling it with a rag? Thats it? Anything else I should be doing? plywood maybe twice?
I'm doing a dry fit first with the frames and the stringers, then removing the stringers and oiling everything first and then assembling it - read a few other people that did that - seem ok?
What exactly am I using on the fabric? Can I get a link just so that I buy the exact right thing? I went to home depot yesterday and there was a million choices and I left a bit overwhelmed.
Paddle - what kind of paddle would be ideal? I know a lot of people like the greenland style but I'm an avid canoeist and I've always used a single blade paddle. I' m happy to try the double blade but what exactly would be the ideal shape/type of paddle for this canoe?
Thwarts - a lot of people seem to be placing them below the gunnels - I was going to place them between the inwales. Is that ok?
Has anyone tried bending a wooden rubstrip instead of brass? Sound like a bad idea given the sharp angle?
I have the assembly manual but some of the stuff seems to assume some knowledge which I don't have and the internet makes a million suggestions which makes it a bit confusing at times. If this turns out well, maybe next year I can try the expedition 2 person canoe Jeff just released. And maybe a kayak for myself...i might be developing a problem.
I'm trying to build the stonefly and things are coming along nicely. I think I've even found a real Baltic birch locally! Well they may need to order it but it's definitely the real deal. My only problem is that it's 5x5 and will not fit in any vehicle I have. What size pre-cuts can I ask them to make so that it fits in my car? They are willing to do rough cuts for free but I don't know what size I can get cuts for. I might be willing to buy a second board simply because renting a larger car would be half the cost of another board and be terribly inconvenient.
I was also going to buy the fabric for the stonefly - how much do I need from the store?
Much appreciate your help! Very very excited to start seeing the boat take shape