Jump to content

Everglades Challenge 2019


Alan Stewart

Recommended Posts

Lots of B&B boats in the race this year. 3 CS-17 Mk3s and 2 CS-17s. My Dad and I are sailing Souther Skimmer but the Forecast for the 1st couple of days does not look that great lots of light and fluky wind.  This year we have outfitted the boat with new wishbone booms to help with better sail shape and as a test for the new rig on Randys larger walkabout cat ketch boat. We are also borrowing grams top down furling gear from his core sound 17 mark 3 to furl the spinnaker. You can follow us on the water tribe tracker or directly on our spot page in case that Web site goes down during the race.

Waterteibe tracker. Make sure to choose class 4 or core sound 17 class to see the sailboats.

http://watertribe.com/Events/ChallengeGMapper.aspx

See the roster here to see who's sailing what boat.

http://watertribe.com/Events/ShowRosters.aspx

 

Direct spot link for Alan and Paul.

http://share.findmespot.com/shared/faces/viewspots.jsp?glId=0Mk47DBz9u4FjqtIgnVgCCoWpX5cRo9fj

 

20190301_121158.thumb.jpg.b4fbea56313affbf495ded8d8b11c2d3.jpg20190227_082950.thumb.jpg.dc3d9d8cb0e1ea421d0033b6e2b625ff.jpg20190224_150623.thumb.jpg.62de733ca379cabff06de53efe0dca89.jpg

Link to comment
Share on other sites


Bumpy & Machoman finished about 0200 in a cat

Twobeers & Moresailesed are about an hour from finishing first in Class 4

Alan and Paul have been fighting two 70+ year old Gordon Douglass designs: SkinnyGenes & SkinnyJeans (Thistle 1945)

 and Andyman & NateDog (Highlander 1949). The three were less than an hour apart at checkpoint 1 and have been close to each other all the way and were at checkpoint 2 at dawn.

No other Class 4 boats are close.

Link to comment
Share on other sites

The winds have now gone west so they now have  a nice fair wind. Windy is now showing 9 knots. It will be fair for the next couple of days. If I was near the rear of the fleet I would want to get a hustle on to cross the Bay before it turns foul. Florida Bay is wonderful in a westerly.

 

The Thistle and Highlander have very large rigs which suits this light air. Greybeard is approaching check point 2  in his mk3 and Bones and Pink dog in their CS17 M3 and 1 respectively are approaching Marco Island.

 

I do not know what happened to Swimboy in his CS17 but he returned to the start on the first day.

Link to comment
Share on other sites

Swimboy's notes on the roster page said he capsized off Sarasota c. 7 p.m. Saturday evening, was able to get righted, then returned to DeSoto.  And his spot track shows he made it back to the DeSoto ramp.  That's a long haul back north in the dark.  Winds apparently were relatively light at the time of his turnaround.  I bet he has a tale to tell.

Having capsized this summer, I'd be interested in hearing from Swimboy.  I still owe you all my tale.

Link to comment
Share on other sites

Alan still has a slight edge on the Highlander as they turn the corner for Flamingo.  I suspect the race will come down to navigation, local knowledge and boat handling as much as anything at this point.  Alan and Dad should have the upper hand there?!

Link to comment
Share on other sites

This is getting exciting, certainly better than watching grass grow. Alan is in charge now, he has opened up better than  a mile and is exactly on course. The Highlander is well north of the correct course. There is a northerly route called Crocodile Dragover but it is too early to head north yet.

Link to comment
Share on other sites

It must have been a dead calm for them to do that much rowing.  As I found out in the informal Messabout "race", the EC22 doesn't need much wind to move well.

 

Congratulations to Alan and Paul; after some sleep I have a feeling they will enjoy attacking their calorie deficit.

 

 

Link to comment
Share on other sites

Tom, 

We had the original green/white/yellow assym spinnaker. It worked well except for our homemeade torque line for top down furling. It had too much twist and would roll the sail unevenly top to bottom causing the sail to hang up when we tried to unroll it. Rolling it up while it just flogged (no sheet load) worked the best. Other than that we wished wed had a bit more luff tension or had adjustable luff tension but we gave that up with our diy top down furling setup. It was worth the trade off but just needs tweaking and maybe a less twistable torque line. 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


Supporting Members

Supporting Members can create Clubs, photo Galleries, don't see ads and make messing-about.com possible! Become a Supporting Member - only $12 for the next year. Pay by PayPal or credit card.




×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.