bagarre Posted August 18, 2016 Report Share Posted August 18, 2016 Jeff pointed out that my stringers should go over the masik and not under like I have them. Only the center stringer goes over. I was going to leave it alone but, after fitting the coaming, I can see that it will change the appearance of the boat a fair amount. As I make the swap, should the stringers terminate at the masik or should they extend a few inches aft? Extending them aft would extend the line in the fabric and may look better. Thoughts? How have others done this? Quote Link to comment Share on other sites More sharing options...
Kudzu Posted August 18, 2016 Report Share Posted August 18, 2016 Stretch some T shirt material over it, clamp it and look at it. That is how I do it. A screwed together plywood coaming and sewn in coaming will look different because of the height of the fabric. Using the t-shirt you can adjust and trim them so they look their best. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.