Todd Stein

Hi Steve; Ditto on Amos’ comments, 2 thumbs up. I have also sailed out from Harbortown boat ramp on the Pungoteauge Creek and it was quite nice and laid back, very little boat traffic and a quality ramp. If you’re looking for a location south of Norfolk and much closer to Vandemere there’s a small park on the Pasquotank River called One Mill Park. It’s south of Elizabeth City sorta in the boonies however it’s a lot closer. Before going there Id check to see if it’s OK to leave vehicle/trailer there for multiple days. I haven’t been there but it looks pretty suitable as long as there’s not a big Southern breeze. Look forward to seeing you at the Messabout. Todd

I admire the beautiful boat you build and you will have wonderful adventures lie ahead. I noticed particularly the significance of your sail number and wish to share with you one interpretation meaning of number 1385. It is believed 1385 carries a message from the angels telling you that the current life transitions that are occurring in your life are the right ones. You should not let any fears and doubts deter you from doing what you have to do. The angel number tells you to trust your inner wisdom as well as the guidance from the angels. You will conquer the obstacles in life’s path. Sail forward, upwards and onwards and welcome what wonderful mysteries lie ahead!

Congratulations, what a beautiful dream boat! You’ve done a remarkable job and I think ? Captain Matthew Flinders himself would be proud of your accomplishment.

Belay previous post, I’ll purchase all five!

I’d like to purchase the two lashing please. Do you accept PayPal or prefer check?

Open statement to all those fellow builders, friends and new acquaintances which attended this year's Messabout. I want to thank everyone especially our gracious hosts for coming out to celebrate a remarkable line of designs and share in the fellowship of these beautiful boats. Each year I learn volumes from the collective and enjoy such supportive commraderie. What a special experience. Thank you for coming out far and wide which further indicates to me the appeal of these boats. I hope to see you all on the water in the future. Fair winds and following seas.

Jumping Jehoshaphat! That’s a beautiful looking boat, can’t wait to see it in person!

More pics waiting for paint to dry.

I've been making slow and steady progress with the boat. Flipping the boat back over was significant mental milestone and helped motivate me to the next goal. I've completed fairing and priming most of the hull and topsides and plan to paint this week. There's beginning to be a lot of pollen so open garage doors is become limited. There's still a large number of smaller items to complete but I feel the I'm getting closer to test in water. The cabin hasn't been painted and I'm disappointed how overhead turned out so I'll probably leave it be until later.

I located a Hobie Miracle asymmetrical with a 12’ luff, 17’leech and 10.5’ foot for $ 175. It looks in great condition however It looks like a pretty flat cut. todd

I’m looking to purchase a asymmetrical kite for a CS20mk3 and looking for dimensions and or recommendations on cut, i.e. code 0 or deeper? r/ Todd

Congratulations, beautiful baby boy!

With Ali-G’s heavy cockney accent, “Yo that B Respect!”

You have such a beautiful boat, I imagine she sails as well as she looks.

I couldn’t agree more especially being vetted by the indomitable Roger Barnes. And it sure beats shelling out the Benjamin’s for an auto pilot.

Mark et all: thank you one and all for the many excellent suggestions. I will first attempt to tie the mast to a tree outback with a series of hitches the get my neighbor who’s a power lifter and myself to pull on the sleeve. If unsuccessful I’ll switch to oil filter wrench and if that fails make a longitudinal cut to open her up enough. I’ll keep you posted with pictures this weekend. Todd out.

Help, Please! The boat is coming together nicely and I’ve begun working on the bowsprit assembly using a high carbon content sailboard mast. I watched the B&B video which shows Alan making a mast sleeve and followed the steps closely. However after epoxy kicked off I couldn’t release the epoxy sleeve. I’ve tried pulling out the longitudinal strips with negres(negative results), heating the sleeve with tea kettle water, spraying multi-purpose lubricant between mast and sleeve, banging down alternating on mast base and mast tip with little results. Since mast is slightly tapered I was able to move the epoxy sleeve 5-6 inches towards tapered end. I tried heating sleeve with heat gun and then grab hold of sleeve and repeatedly slam mast tip, all with negres. Can somebody please suggest another technique before I have to cut the durn off and start again?

Howdy Young Gun and welcome to the rodeo. You selected a wonderful design and will hopefully bring you a huge sense of accomplishment not to mention the joy of sailing and adventure.

Happy New Year Don, it seems you’ve done your due diligence thinking through the tent selection and I now better understand the challenges. Choosing a side entry is a good choice with the tents you’ve selected and I’d like to offer up another two suggestions. First, Since we’re working with such limited space, foremost in my mind would be selecting a tent which is easy to set up and even free standing. Second concern, and again this is my preference, is maximum ventilation. like the idea of lots of mesh but that can be a double edge sword. I’ve experienced my fair share of early morning “Chinese Firedrills” scrambling to set up the rain fly. That has a large suck factor proportionate to preceding comfort level. Value in a significant other and things can go from bad to worse. Sleep in the buff gains you more points and opportunities to make new friends!

Sorry thumb slip. I’ve done a good bit of backpacking and camping using tents and hammocks. I don’t have experience using tents on boats yet but I’m inclined to try something different, especially if the cabin gets too hot to sleep in. One concern I thought about is having a side entry for ingress/egress. It could possibly be problematic having limited deck space and beam width. Maybe an tent opening facing the bow or stern would be easier entry. Any rate sounds like a fun option to explore. Stay safe and have a joyous New Year! todd

Hi Don; ive do

Valid point I’m having to look at carefully, best to be sure tiller doesn’t bend down. Maybe a thin veneer strip of starboard ? I appreciate the feedback of sealing the bailers. I’m leaning toward using polysulfide (small tube). It’s always frustrating having the darn stuff dry hard in the 10 oz cartridges. I had to chisel out a lot more wood to get the bailers flush. A mistake a made was having the bailer cutouts to close to centerline causing the bailer flange to impinge on the keel strip, ugh. Work around was to set the bailer a little bit deeper. Another huge lesson I learned while pre-screwing the keel strip was to use the ever present dry wall screws which I used throughout the build. Forgetting the hardness of mahogany, I had 3 of the dozen or so screws shear off causing frustrating time digging and pounding out the embedded screw. That provided enough reflection to replace all with beeswax dipped s/s screws. Ah the lessons I learn along the way. Kinda wish I could take a sabbatical to a wooden boat building school!

I’m working on the keel strip using African mahogany. I’ve finished building up a “sharpened” chine starting aft of the centerboard as well as the bottom of the transom. I hope it holds up to wear and tear and provides the added performance when the wind pipes up. I used a chisel and dremel sander to recess the two ballast bailers which I hope to mount this week. What would you all recommend to seal the bailers, polysulfide? Last picture is a tiller lock I saw on the internet and wanted to inquire if anyone has had experience with using one? I’m unclear if the hardware could possibly work on the CS.

Getting envious of such a nice paint job, is that a 2 part LP you sprayed? I’d chosen Pettit polyurethane which I’ll roll and tip because I don’t want to vape the house with noxious fumes. I sprayed that once in the garage and was then frequently reminded by family not to poison them! Wishing I was friends with a automobile painter which I could bring to his shop. anyways nice job, looks fast and sleek.