Terry Dunn
-
Posts
189 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Posts posted by Terry Dunn
-
-
Reading this thread makes me feel guilty about what my CS 20 sits on. About 14 years ago I bought a used 1987 trailer that had an 18' inboard outboard sitting on it for $250. . The 14" tires were new. It is galvanized and looks like it has lived in many places. The boat rests on 7' 4" 2x4 bunks with carpet and some keel rollers. The back of the boat hangs over the back of the bunks by about 3 1/2 ft. 4 years ago I bought new tires and had the bearings packed. I squirt grease into the bearing buddies occasionally. I live in the Denver area. The trailer and boat have been to Lake Superior, Anacortes, WA (boat to Friday Harbor), the Texas 200 3 times. I have not had a flat tire or an trailer problem. I should have taken a leaf out of the trailer but I did not so it is a stiff ride for the boat. Pore thing.
So I m probably due some bad luck this year when I drag the boat to Port Isabel for the Texas 200 again. It is about 2500 miles round trip. Gotta buy a cartridge for the grease gun and check the tire pressure.
-
Looks good! Thanks for sharing.
-
I have a Garelick like David's on my CS20. I have not used it. I suppose I should try it sometime in the water. It has been on my boat for 8 or 9 years.
-
Thanks for putting together and sharing the video Edward.
Wow! 10 to 12 ft waves are big! I hit 10 mph crossing Corpus Christi bay double reefed wing and wing but the waves were only 5 or 6 feet by my guess. The wind was not that strong as well. Nothing compared to what you describe.
I'll probably run into to you at the wooden boat festival next month.
-
FYI, As of today I am able to get to messing-about.com from my CenturyLink internet. I don't know what they did to correct the problem.
-
My Anderson bailer works about like Ken Potts described. Sometimes at lower speeds I have stuck a screw driver in the bailer to open the flap. That worked ok except when I forgot to take it out.
-
1
-
-
Hi Fishman. Beautiful boat! Is that Pueblo Reservoir?
-
On the 2011 Texas 200. Too bad I did not get a picture of her sailing.
-
Hi Greg. I am in Aurora. Where are you in Colorado?
-
I think Speedy Metals is a bit cheaper than Online Metals. Up to 105" pieces can be shipped via UPS. I have used both Online metals and Speedy Metals over the years.
-
I used 3" PVC couplers on mt "stepper helpers" for my CS20. They are no longer on the boat as I converted to a different rig and my masts are 6' shorter.
-
-
Here is a diagram I used to make a simple tiller tamer. It works well for me on my CS20.
I also have the ladder that David suggested. I have not actually used it to board the boat in the water.
-
Hi Hal,
Sounds like you having some fun with your CS17.
On my CS20 I ran the halyard, 3 down-hauls and the snotter back to the cockpit so I could lower sail, reef etc. from the cockpit. I tend to over-complicate things. Once I got it set up right I could pretty much reef the main from the cockpit. I still had to move the snotter at the clew and go forward to tie the reef nettles so not a perfect solution. But I could adjust downhaul and snotter tension from the cockpit.
I look forward to see what suggestions people on the forum make.
-
Are you considering a sliding seat rowing setup?
-
Have you tried sailing with the main in the third mast position? If not, you might want to try that to see how much less work it is to sail with one sail. My CS20 is currently set up with two 90 sq ft balanced lugs. It takes me just as long to set up to go sailing as the sprit sails but the masts are shorter and easier to step.
-
1
-
-
Jane and I had a nice ride on the 1947 launch with Ed and the new owner of Core Sound 20 number 35. What are the odds of the owners of 35 and 36 are in the same place coincidentally when we live 1300 miles apart and had never met.
-
Looking good.
When I had a 5hp tohatsu I would disconnect the fuel line and run the motor out of gas after each use. I did not have any issues with the motor getting gummed up. That is what my father always did with the old early 50's two stroke we had.
I am with you on how much nicer it is to sail than motor. I have hit slightly higher speeds under sail than with the 5 at full power.
I look forward to se your boat under sail. Congrats on the first CS 17 M 3 in the water.
-
Any updates?
-
Since Ed mentioned my boat in this thread I thought I would reply.
Ed said: "There is a CS20 in Denver with a cat ketch, lug rig. I noticed he really had to upgrade the masts to make it work."
As it turns out the masts for my balanced lug rig are the same size as the two bottom sections for the stock rig. 3" and 2 1/2 " in diameter. Since they are 6 feet shorter and have no sail track they are light and easy to step so I took off my mast stepper helpers. I think the main reason I did the balanced lug rig was just 'cause it seemed like a fun project. Since I am no great shakes of a sailor I don't worry much about how the rig performs compared to the standard rig. I have not had the courage to sail with full sail in much wind. I look forward to reports on how the CS15 lug yawl perform since I would like to go from a CS20 and S10 to a CS15
-
Your boat is coming right along. One way to remember how to post pictures is to post them often. Hint Hint.
Your trailer looks great.
Where do you plan to do your first launch?
-
Is this you coming in?
I saved the image from a webcam in Victoria Harbor.
-
Here is Edwards son with my wife Jane last year at the Port Townsend Wooden Boat festival. He was a lot of fun.
-
I voted "Often. Almost every time I go sailing". But i should qualify my answer. On my CS 20 the oarlocks are far enough aft for me to drop a temp seat aft of the mizzen to row. Not great but works good enough to get around. For the last ten years I have planned a rowing station forward of the mizzen. I even bought the oarlocks. I just have not gotten around to installing them. Perhaps in the next ten years I will get that done.
Seattle CS17 Mk3 Launch
in B & B Yachts Forum
Posted
Beautiful boat.
I will look for your boat at the Port Townsend Wooden Boat Festival. We plan on being there on Saturday.