Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 07/13/2021 in all areas

  1. Here is the first installment. It was a grand adventure but as much fun as it was to leave, it was even better to return. The trip was everything that I hoped that it would be. People asked me why I rushed, I could have spent a year doing that trip but you cannot just abandon your home. We live in hurricane alley and I did not want to leave Carla to have to face one alone. I was able to get a good flavor of the area and I can drive to places in the future and I can do a section in as much depth as I like. I did this trip for many reasons. It is obvious that my voyaging days are over so I made this like a mini voyage and I also wanted to prove the mk3’s as a valid coastal micro cruiser. Carlita turned out to be close to perfect for me. The only improvement that I can think of would be to have a 20 mk3. Nothing wore out or broke except for the wind indicator when I scraped it against the mizzen mast while raising the main mast between bridges. I was able to glue it back together. Note to self, watch the indicator as it passes by the mizzen mast. Beside being fast and easy to sail, navigating in shallow water was where she excelled. She covered many miles in water less than a foot deep with no centerboard or rudder, steering and tacking with just the sails. When aground I would walk around the boat, looking for deeper water. The bowsprit gave me the leverage to rotate the boat to face the deeper water. The boomkin was just the right height to lift and push. I usually got away with it, saving me from having to wait for the next tide. An electric pump for the water ballast would be handy so that you could lighten the boat quickly if the tide was falling. I tested the water ballast several times. I naively thought that Delaware Bay was going to give me a break. The forecast was SE 10 to 15 knots, I ended up with 2 reefs in each sail and still surfed to 8 knots. I broached her twice, the first time I was concentrating too hard on the chart and got way off course at the wrong time. The second, I got slammed on the starboard quarter by a breaking wave. The rudder ventilated down the low pressure side and around we went. To my amazement we never heeled past about 20 degrees and suddenly we were safely laying a-hull. Several times I deliberately rounded up to reef or to tend to some business but with the luxury of picking my time. Single handing can be hard sometimes. Another test was on the last day: There was a small craft warning for Pamlico Sound with forecast SW winds gusting from 20 to 30 knots. I was only 28 miles from home. I decided to get underway at 5 am to beat down the Pungo River and cross the Pamlico River before the wind reached full strength. The plan worked well and just before the Hobucken Cut got narrow I decided that I could afford to put the anchor down and have breakfast. I left the sails up as it was going to be a short stop. It was hot down below with the vent and hatch dogged down. I opened the hatch to full wind scoop, forgetting about the sail. It was very pleasant. Suddenly a big gust blew the bow to port and the reefed foot of the main caught on the hatch and we were laying over. By the time I got on deck and realized what the problem was we were upright and it was over. I lowered the hatch to just a foot above the deck and life was good again. When I went to raise the anchor it felt like it was fouled. It was the hardest breakout of the whole trip. I have some other ballast ideas to try but I think that it is valid as is. Steve, yes I brought the anchor back to the cockpit and I am very pleased with it. There is nothing special except that I have a cleat about 18” forward of the sheer break. I left the bitter end tied to the bowsprit tube and the main part of the 100 ft rode in the anchor locker, the rest was just flaked on the cockpit forward. The Danforth self launches because it does not stow neatly. The Bruce/ claw stows neatly but I have to give it several flicks from the cockpit before it will launch.
    1 point
  2. I wonder if the schooner sail plan is just the result of someone putting up the sails in the wrong positions. I built my CS15 to have a lug yawl sail plan. The configuration works well for dinghy cruising with a clear cockpit and convenient tent poles. I'm not sure what kind of information you're looking for, but I'd be happy to answer any questions. Bob
    1 point


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.