We are putting in the stringers in the forward bulkhead on the hull and on the floor just aft of the bulkhead itself.
The ones in the bulkhead fit no problem i.e, it is easy to orient them so they lay flat.
We are assuming that these stringers are screwed in to insure tight fit while epoxy dries.Screws removed after drying. That seems straightforward.
The floor stringers aft of the bulkhead do not lie flat at all. To get they to lay flush with the floor, something is going to to have bend: the stringers, the hull or both.
Should I be worried about that? Or find an alternative?
While I am at it, what specifications should be used for the Bow eye?
thanks in advance for any helpful advice.
Chris from VT.