Jump to content

Kudzu

Members
  • Posts

    3,020
  • Joined

  • Last visited

  • Days Won

    77

Other groups

Supporting Member

Kudzu last won the day on July 18 2023

Kudzu had the most liked content!

1 Follower

About Kudzu

  • Birthday January 1

Contact Methods

Profile Information

  • Gender
    Not Telling
  • Location
    Tennesse River

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Kudzu's Achievements

Grand Master

Grand Master (14/14)

  • Very Popular Rare
  • Reacting Well Rare
  • Dedicated Rare
  • Posting Machine Rare
  • Collaborator

Recent Badges

171

Reputation

  1. Here you go https://www.kudzucraft.com/web/which-boat-should-i-build VARDO has been extremely popular with first timers. Good all around boat but for me the interior volume is just to large. But that is what beginners like. I prefer a boat that my knees touch the deck because as your skills increase you learn to turn the boat with you hips as much as the paddle. Being able to wedge yourself in the boat makes this much easier. It is not so tight you are locked in. Matter of fact if you flip on purpose you will tend to slide out.
  2. Mine are aimed more at flat water and new paddlers. I don't think you would be happy with any of my designs compared to what you have.
  3. New store is finished. I moved it to my website. You will find we are carrying a much smaller inventory now. Sales levels since Covid have dropped dramatically and it is just economically feasible to keep our previous inventory in stock. We are focused on plans, books and a few basic supplies. Our fabric source has dried up and we have no fabrics at the moment. We hope to add it back to the store but finding fabric has always been a struggle. But I am going to keep looking because I was about the only one selling a good polyester fabric Want to say thank you for your past support! Jeff
  4. Looks great! Since you bought those plans I have made a couple of small changes. One is the frame under the rear of the coaming now has a center brace cut in the frame. I found after a couple of years of regular use the plywood started to weaken and eventually collapsed. You can make a simple brace that will wedge between the keel and the deck. I just cut a couple of slots and made it snug fit. Works good and will save issues down the road. You can remove it if you need access to the rear space too. As for the coaming support, since you did a laminated coaming you can probably get along fine without it. I don't use them in mine but of course that will depend on how strong you coaming is. How much spring back it has.
  5. Did not think about it till seeing you photo, but last ones I did were with the old fabric which had a loose weave and was easy to more around to conform. I don't have any good suggestions without seeing it person. I do remember the first one I built I ended up putting a seam horizontally along the fantail. I will think on this but not sure I have a good idea. New fabric may not be a good choice for this boat.
  6. I always sew mine. It takes some patience to get it right but it can be done.
  7. This is the reason I never built a traditional boat. They are built by eye, not by plans (for the most part). There isn't a good easy way to build two exactly alike boats. Fuselage frame may not be identical but they will be extremely close. And no, no longer doing classes. Last one I tried to put together all but one student backed out. Just hard to put on a class for a price people are willing to pay. So I sold off all the tools and supplied I used in the classes.
  8. I have not read about bledding fingers but if you follow my method for sewing on the skin it won't be a problem. I have a video(s) up showing how I sew on the skin. Use the thread to pull the skin tight and a dowel to pull the thread.
  9. Even I am always amazed at the weight of the frame. Of course the skin and paint will bring that up but even so they are so easy to handle compared to Tupperware boats.
  10. In the 12 years that VARDO plans has been available I have never been asked that question. Sounds like you caught a 12 year old mistake to me. Plans list quantity for all three (even though it does appear only two are needed) Deck beams are listed on the plans and long enough. You don't have to waste those, just cut a scarf and glue them up to length needed. I do it all the time. Never built a boat that didn't have a few scarfs in the stringers.
  11. BINGO!! Thank you. After reading it the only real restriction for me is the battery can not be directly under orover the gas tank. I wasn't planing on that so not an issue and another Internet know-it-all put to rest.
  12. I don't frequent this group often and probably should. Restoring a '62 CC Sea Skiff and need to relocate the battery. Existing space is VERY tight, Was located in the bilge. I can find a battery that will fit but there is no way to put in a box and I really want to do that. So I need to relocate. Tons of room under either of the front seats. But I am leaning toward putting it aft, under the rear seats. It is large open space with super easy access. The gas tank is located behind the seat. 30 gallon galvanized tank. Battery would be adjacent to it and with all the ventilation I see no issue. But I have people in another group howling at the idea. Some are saying it is against CODE ? I assume they mean some regulation but I can't find anything anywhere that addresses this. I don't see the problem but I thought I would ask here. Is there a safety issue with a battery beside/under the tank? I would be in a box and tied down.
  13. Store is and has been open for a while now.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.