Jump to content
Panda FREE Antivirus for Personal Use (affiliate link)
AmosSwogger

Core Sound 20 Mark 3 Build - Chesapeake, VA

Recommended Posts

Technically a few days is fine, though it depends on what you'll be priming over. If it's a mixed bag of fillers and various thicknesses of epoxy, I'd wait a week, but if everything was top coated with neat goo after the last fillers went down, a couple of days will be fine. The real issue is "print through" which is the fabric weave showing through (film thickness shrinkage) after it's painted. To prevent this, wait a week. If no fabrics were used or you know there's enough material over it (fillers, etc.) then a couple of days will do. Print though can be covered with several coats (and blocking) of high build primer.

Share this post


Link to post
Share on other sites
14 hours ago, PAR said:

Technically a few days is fine, though it depends on what you'll be priming over. If it's a mixed bag of fillers and various thicknesses of epoxy, I'd wait a week, but if everything was top coated with neat goo after the last fillers went down, a couple of days will be fine. The real issue is "print through" which is the fabric weave showing through (film thickness shrinkage) after it's painted. To prevent this, wait a week. If no fabrics were used or you know there's enough material over it (fillers, etc.) then a couple of days will do. Print though can be covered with several coats (and blocking) of high build primer.

 

Thank you for the reply.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×