Richard C Posted April 14, 2016 Report Share Posted April 14, 2016 https://r2ak.com/about/ I ran across this event and it sounded ideally suited to the CS series. Lots of homemade trimarans, kayaks and open rowboats in the entrants list. One guy is doing it on a stand up paddle board! Sounds like an adventure. Quote Link to comment Share on other sites More sharing options...
MisterMoon Posted April 15, 2016 Report Share Posted April 15, 2016 A CS17 ran the first leg last year. Quote Link to comment Share on other sites More sharing options...
Randy Jones Posted May 18, 2016 Report Share Posted May 18, 2016 That would be Edward - Ed, please step up and share your plans. This race seems ideal for a CS17 or 20mark3 along with an iron crew of three. They would be competitive with the right combination of beating to wind under ballast and rowing unballasted in during calm weather. Race starts June 23rd. Quote Link to comment Share on other sites More sharing options...
ecgossett Posted May 20, 2016 Report Share Posted May 20, 2016 What do you guys want to know? I just got back from a 94 day northern sub patrol, and found out my teammate who was covering 1/2 the costs could no longer make it from DC. I thought smaller and am doing the first leg of the race again, and flying my father out. Everyone at beer table race meeting several years ago, wanted a version of Everglades Challenge. There was actually an attempt for a trial Orca WaterTribe challenge. Month before chief couldn't make it, and called everything off. This race was born out of need for a variety of boats due to water and conditions, meeting insurance requirements, yet fostering affordable innovation, and creativity. Some perceived rules no one liked with EC where changed; yet believe me there is a lot of red tape required, and unbelievable amount of information provided that is given to both countries cost guard, boarder control, and race bosses use for safety matrix. Quote Link to comment Share on other sites More sharing options...
ecgossett Posted June 7, 2016 Report Share Posted June 7, 2016 Another great feature of the Core sound's in WA State is in low tides I can still launch in the mud.. I pushed the boat out 20 feet with rope running to the kids on the dock, by the time I'd parked the boat was high and dry. We waited an hour until we had 6 inches of water and managed to get out. A little practice this weekend with my 8 year old and future racing partner driving.. Yes, she was screaming when we would burst to 6.4knots. I finally pulled the centerboard out after about 3 years, a few scratches from sand etc. The rope on the bottom held up great. My three year old sanded, and I used West System 310 micro fairing to make a nice coat to sand off. It will be smoother then when I originally built the boat. The tab with the pulley's has really taken the worst beating.. I've resanded and repainted several times in that area.. It just gets beat on with blocks, rope and people or gear bumping and kicking it. Quote Link to comment Share on other sites More sharing options...
Hirilonde Posted June 7, 2016 Report Share Posted June 7, 2016 This post makes me miss my sailing partner and helper, my 3 year old grandson. It will also make my visits even more fun to look forward to. What great fun and satisfaction messing about in and with boats with children is. Fortunately the US Air Force moving allowance covered sending my custom box trailer containing one Spindrift 9 N from MA to GA as part of personal posessions. Now when I visit we have a boat to sail together. Thanks to home building, great designs and the Air Force, I can afford owning 2 boats in different places at the same time. I like picture #5 best Edward My partner Kinley double checking my work: Quote Link to comment Share on other sites More sharing options...
Chick Ludwig Posted June 7, 2016 Report Share Posted June 7, 2016 Hey Dave. Where is Georgia? If it's upper and west, it may be fairly near me. Sure is a purty boat your young-un is measuring. Quote Link to comment Share on other sites More sharing options...
Hirilonde Posted June 7, 2016 Report Share Posted June 7, 2016 Hey Dave. Where is Georgia? If it's upper and west, it may be fairly near me. Sure is a purty boat your young-un is measuring. He and his parents moved to Brunswick, south of Savannah on the coast. They will be there for at least 4 years with no chance for deployment as my son-in-law accepted an assignment as an instructor at https://www.fletc.gov/ It would seem they couldn't be further from you and still be in Georgia if they tried. What is it, about 5 hours drive apart? Quote Link to comment Share on other sites More sharing options...
Chick Ludwig Posted June 7, 2016 Report Share Posted June 7, 2016 Good guess. 5 to6 hrs. Quote Link to comment Share on other sites More sharing options...
ecgossett Posted June 7, 2016 Report Share Posted June 7, 2016 I spent a lot of time in Brunswick, on my boat(s) and the tall ship sv Peacemaker. The water between Jekyll and Cumberland island is considered pretty dangerous, because of the weird currents and big waves you can get. Quote Link to comment Share on other sites More sharing options...
ecgossett Posted June 7, 2016 Report Share Posted June 7, 2016 And just now to illustrate my point about that water: Missing boater found dead, search continues for wife http://www.wjcl.com/news/local-local-news/coast-guard-searching-for-missing-boaters-off-georgia-coast/211369314/story Quote Link to comment Share on other sites More sharing options...
ecgossett Posted June 17, 2016 Report Share Posted June 17, 2016 Finished sanding foils, while wet with 320grit. Process was 4 coats of graphite epoxy with 80 grit in between. Then 120 grit, 220 wet, and 320 grit wet. Still a couple small areas of epoxy that could be a little flatter, and a few raised spots from filling in minor imperfections, and a couple of touches or primer showing through. However, I think I'm at the point of diminishing returns and will be skipping any more coats this time around. The other side is almost perfect!! The difference was I went to 120grit before applying the first coat of graphite epoxy.. It seems to have made everything easier for later sanding. Quote Link to comment Share on other sites More sharing options...
ecgossett Posted June 21, 2016 Report Share Posted June 21, 2016 Dodger, tent, and improved tiller tamer are complete!! Boat goes a lot faster with my much improved centerboard and rudder. I faired, sanded, graphited, sanded etc. I attached a photo showing the tiller tamer.. We plan on purchasing a small SS s-hook and closing one end, to make removal faster then the carabiner. It's straight up bungee cord, and we tried a plastic/aluminum cleat the aluminum grabbed the bungee much easier.. No need to hook in a piece of rope to it. Having the big screw in hook right behind where I grab the tiller, versus further back means the tiller can turn harder, and less chance of scraping top of boat. Boat still doesn't ROW worth crap in HEAVY wind.. Once broadside to wind with board down, very hard to turn boat using forward rowing station, and rudder all the way over. Quote Link to comment Share on other sites More sharing options...
ecgossett Posted June 23, 2016 Report Share Posted June 23, 2016 #Foggysailing on Twitter or Facebook. Nice warm summer day. Time for a lineless tan Quote Link to comment Share on other sites More sharing options...
ecgossett Posted June 24, 2016 Report Share Posted June 24, 2016 Tent worked, reefing systems excelled, we beat the Scamp including a one on one rowing, and dodger dodger kept boat dry! Quote Link to comment Share on other sites More sharing options...
Docpal Posted June 24, 2016 Report Share Posted June 24, 2016 Ed, Nice way to test out your modifications ! Congratulations on another successful finish....! Quote Link to comment Share on other sites More sharing options...
ecgossett Posted June 24, 2016 Report Share Posted June 24, 2016 Back in Us. After helicopter almost capsized us at start line (read the news), we started race reefed. Maybe running we should have unreefed, but we hit 9knots reefs and dug bow in a couple of times. Went west before shipping lane convergence zone we where told to avoid. About the time we started north, wind died for a couple hours.. a card game out two later, we got some wind and made it to Victoria. Coming back today was rough, accidently cursed on radio while reporting position to vessel traffic, because it has gotten so rough at 32 knots of wind, we wanted to update our location. Mid broadcast, got slammed between waves, and sails kissed other wave with water coming over side.. We stayed pretty dry until motoring into the wind tunnel in the protected Anchorage at port Angeles. Water and spray constantly over bow and dripping. Quote Link to comment Share on other sites More sharing options...
ecgossett Posted June 25, 2016 Report Share Posted June 25, 2016 Back in Us. After helicopter almost capsized us at start line (read the news), we started race reefed. Maybe running we should have unreefed, but we hit 9knots reefs and dug bow in a couple of times. Went west before shipping lane convergence zone we where told to avoid. About the time we started north, wind died for a couple hours.. a card game out two later, we got some wind and made it to Victoria. Coming back today was rough, accidently cursed on radio while reporting position to vessel traffic, because it has gotten so rough at 32 knots of wind, we wanted to update our location. Mid broadcast, got slammed between waves, and sails kissed other wave with water coming over side.. We stayed pretty dry until motoring into the wind tunnel in the protected Anchorage at port Angeles. Water and spray constantly over bow and dripping. Quote Link to comment Share on other sites More sharing options...
ecgossett Posted August 5, 2016 Report Share Posted August 5, 2016 Video of race to alaska.. Some great shots of staysail flying, and yes I had it up in way to much wind, as you might be able to tell once or twice from the water whipping past. 1 Quote Link to comment Share on other sites More sharing options...
Chick Ludwig Posted August 5, 2016 Report Share Posted August 5, 2016 I enjoyed "sailing along with you" this morning. Thanks for the video. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.