ecgossett Posted July 16, 2013 Report Share Posted July 16, 2013 I've used orange based paint remover, and gotten all epoxy and paint off coaming, then sanded it down. One of my goals is to strengthen the top of the coaming. Would 3"x6 ounce glass tape work all the way around the top (with one side resting against deck), laminated in place with plastic look good? i will be one inch short of inside bottom of coaming, but this would significantly strengthen the coaming for wear and tear. I'm tired of redoing varnish and or epoxy. My other option is to use the Schooner Varnish I picked up, and water the first coat down with pain thinner, so it soaks in and do the whole coaming in that and worry about replacing the coaming instead at a future date. Oh, who's going to the Pocket Yacht Palooza in Port Townsend this weekend? Quote Link to comment Share on other sites More sharing options...
Hirilonde Posted July 16, 2013 Report Share Posted July 16, 2013 One of my goals is to strengthen the top of the coaming. Would 3"x6 ounce glass tape work all the way around the top (with one side resting against deck), laminated in place with plastic look good? i will be one inch short of inside bottom of coaming, but this would significantly strengthen the coaming for wear and tear. I'm tired of redoing varnish and or epoxy. I don't see how this helps protect your varnish from wear and tear. Quote Link to comment Share on other sites More sharing options...
ecgossett Posted July 16, 2013 Author Report Share Posted July 16, 2013 It helps protect the wood from damage, (ie oars, people getting in, stuff accidentally hitting them, & my kids). Quote Link to comment Share on other sites More sharing options...
wkisting Posted July 16, 2013 Report Share Posted July 16, 2013 Well, varnish will come off regardless and need to be replaced periodically, but adding tape/epoxy will help thicken and harden the coaming's epoxy coating so that dings, scrapes, etc. aren't as likely to penetrate into the wood itself. So in that sense, it will save you from re-epoxying as often.Do you have a single layer thickness coaming? If so, I think the single best upgrade you could make--though a bit more labor intensive--is an idea Ray suggested to me during our build: Double the thickness of the coaming by running a second layer of 1/4" thick wood around the outside (i.e. along the outside face, and above deck portion of the coaming). On our CS20, the coaming is spec'd to be 1/4" thick, but after installing the ply backrests that form the coaming, we added 1/4" thick strip of Mahogany all the way around the outside of the (above-deck) coaming. As a result, the upper edge of our coaming is 1/2" thick. I ran around both the inside and outside edges of the top of the coaming with a 3/16" roundover bit and then epoxy sealed and varnished. The finished product looks nicer, feels better against the back of your legs when hiking out, and stands up to a lot more abuse. Quote Link to comment Share on other sites More sharing options...
Dale Niemann Posted July 16, 2013 Report Share Posted July 16, 2013 I did the same think Wes did. It has held up well. However, the reason I did it was because I needed the additional thickness to screw the snaps for my canvas cabin. Dale Quote Link to comment Share on other sites More sharing options...
ecgossett Posted July 17, 2013 Author Report Share Posted July 17, 2013 1/4" coaming. After being flipped, smashed, and then repair pieces put in, it looks a little patchwork on parts. Eventually the whole thing will need replaced. With my build for the EC22 getting ready to go into full swing, and selling the CS17 in the future, I just want it to look nice. Quote Link to comment Share on other sites More sharing options...
wkisting Posted July 19, 2013 Report Share Posted July 19, 2013 If it's already 1/4" thick... What about fairing the coaming all the way around with thickened epoxy, then sanding it lightly and painting it? That would eliminate the patchwork (cosmetic) issue you described and the problem of varnish. A brown or tan color would probably look good. I would think if the coaming is 1/4" thick, you should already have adequate strength as long as your patches were done well, so I'm not understanding the purpose of applying the 3" FB tape as you mentioned. However, it should be doable if you think it's necessary. But it doesn't solve the cosmetic problem unless you paint it. Also, if you're planning to wrap the tape over the top edge of the coaming, that might become labor intensive. I'd probably only apply it on the outside edge and then trim it flush with the top of the coaming after it hardened. And if you're going to wrap it down onto the deck, you'll want a well radiused fillet for that purpose. Quote Link to comment Share on other sites More sharing options...
PAR Posted July 19, 2013 Report Share Posted July 19, 2013 I would consider a "cap" of some sort. Typically these are hardwood, with well round corners, often notched on the bottom or "let" on the inboard face so the combing edge is protected. These caps also provide a little more meat to sit on, which is particularly import if you have a bony butt, with little padding, like me. Quote Link to comment Share on other sites More sharing options...
Ray Frechette Jr Posted July 20, 2013 Report Share Posted July 20, 2013 1 coat of cheap white paint lasts 5 times longer than 5 coats of quality marine varnish... Quote Link to comment Share on other sites More sharing options...
PAR Posted July 20, 2013 Report Share Posted July 20, 2013 Paint is always a better choice for durability over clear finishes. Of course it doesn't look as nice, but we make similar trade offs when selecting all sorts of stuff, especially wives. Quote Link to comment Share on other sites More sharing options...
ecgossett Posted July 20, 2013 Author Report Share Posted July 20, 2013 I just worked hard to removed all traces of the white paint I'd put on the coaming to protect it temporarily (year), and varnish it. Par, after looking at the cap on the Scamp's coaming, thats not a bad Idea. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.