Curlew build completed
Posted 12 August 2012 - 04:14 PM
tn_100_2879.JPG 96.91K 54 downloads
tn_100_2880.JPG 106.29K 60 downloads
tn_100_2890.JPG 60.64K 68 downloads
tn_100_2891.JPG 197.28K 65 downloads
tn_100_2892.JPG 221.2K 58 downloads
Posted 12 August 2012 - 05:48 PM
1st build - Curlew
Posted 14 August 2012 - 06:33 AM
Kudzu Craft SOF kayaks
Posted 15 August 2012 - 04:51 AM
Communications Gypsy since 1985.
Posted 17 August 2012 - 08:53 PM
Posted 10 September 2012 - 04:02 AM
tn_100_2994.JPG 128.9K 28 downloads
tn_100_2996.JPG 141.14K 28 downloads
tn_100_3006.JPG 239.55K 22 downloads
tn_100_3012.JPG 277.46K 22 downloads
tn_100_3014.JPG 215.59K 22 downloads
tn_100_3015.JPG 197.14K 23 downloads
tn_100_3016.JPG 174.28K 22 downloads
Posted 14 January 2013 - 11:05 AM
Rather than start a new thread since this is about the Curlew I'm replying here. I'm laying out frames having completed ripping stringers etc. and trying to think at least 1 step ahead. So I spotted the stern deck beams and marked them, still have to adjust to make sure they are under the skin, but not sure why. On my other SOF they contact the skin. Then I looked at the forward deck to mark placement. Confused as to a dimension I went to the book. No mention of them. Then I find a spot that says there is only 1 deck beam for the Curlew and it shows it that way in the picture. The frame as laid out from the offsets doesn't look like the picture. It needs to have 2 deck beams plus the center. So, look at the website. Pictures show deck beams forward of the cockpit. Next, Woodman's build pic's. Same frame as what I have laid out. Shows 3 stringers across the top of the frame at the cockpit. Sooooo, unless someone knows something I'm not seeing I'm going with 2 deck beams from frame 8'2" to frame 10' setting them at the coordinate points. I'm assuming that Woodman added and rearranged his frames from what I'm seeing in his pic's above.
All this also brings up 2 more questions: 1) Almost 3 feet between the frames at the coaming. Long span for 1/2" plywood sit boards?
and 2) amy problems with size 13's? Looks tight up there by frame 10'.
Posted 14 January 2013 - 01:00 PM
Hey, Woodman. Nice build. Just curious....what's the partial frame just ahead of the cockpit cushion (attached to just chines and keel)?? Was that on the plans or is it something you added? Thanks.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users