jerryg Posted May 19, 2012 Report Share Posted May 19, 2012 Hi everyone, In Jeff's second video on polyester skinning he shows how nice and tight things get at the bow by "lifting and pulling". Mine, not so much, Obviously I wasn't lifting and pulling enough, though I though I was. My question: Should I just seam around the bow until I get it all together, or is there a way to save this and kinda make it look like Jeff's? Thanks. Jerry Quote Link to comment Share on other sites More sharing options...
Kudzu Posted May 19, 2012 Report Share Posted May 19, 2012 Well, you missed a little detail in my video. That was a true Greenland bow. You will never get that fabric to conform like the video on your bow shape. Your doing fine! That is way mine would look too. Just keep going on around the bow. Quote Link to comment Share on other sites More sharing options...
Hirilonde Posted May 19, 2012 Report Share Posted May 19, 2012 That picture doesn't really help me see any problem. I think most people, myself included had visions of the skin being tighter during sewing and after shrinking than is really possible. It may just be that your expectations are too high. It will never become drum tight. Is the skin overly wrinkled or flopply? Quote Link to comment Share on other sites More sharing options...
jerryg Posted May 19, 2012 Author Report Share Posted May 19, 2012 Hi Jeff. Thanks for the confirmation. Much appreciated. Hi Dave. Thanks for the info. There's no noticeable wrinkles or floppiness, though I've haven't done the stern or coaming yet. I did some tests with some cutoffs of the cloth to get an idea of how much it would tighten up. Maybe I have been pulling a bit too tight as I've been sewing, to try and compensate. Great! Tomorrow I get back to sewing and hopefully get the rest of it done. Thanks again guys. Jerry Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.