woodman Posted May 13, 2012 Report Share Posted May 13, 2012 This was a fun project...band sawed and sanded on my homemade 6x115 edge sander...routed what I could and using a block that I slip a 40 grit 3''x21'' sanding belt on...finish up with an orbital sander some 3hrs later and linseed oiled.... 1 Quote Link to comment Share on other sites More sharing options...
P Doug (WA) Posted May 13, 2012 Report Share Posted May 13, 2012 That really turned out great. I keep checking the cedar 2 x 4's at my Home Depot, but they are so full of knots I've been shying away from them. I don't think a few knots would hurt but,,, I'll keep looking, I really want one. Got a picture of that home made edge sander? Something else I'd really like to have, but time, money (lack of) and space (lack of).......are a problem. Quote Link to comment Share on other sites More sharing options...
Kudzu Posted May 13, 2012 Report Share Posted May 13, 2012 Same here Paul, hard to find good 2 bys also. But I just found a couple that I am going to make my oars from (I think). I have noticed that with the recession the quality of the lumber we are getting is actually better. Not great, but I do find it easier to find decent cedar. But any time I find a good 2 by I buy it and put it in the rack. But don't over look laminating a blank. Using some basswood or cypress makes some really nice contrast against cedar. When I make a GP I use the bandsaw, a shop-made scrub plane to rough it out and then a lot of hand planing. Never use the belt sander. Quote Link to comment Share on other sites More sharing options...
woodman Posted May 14, 2012 Author Report Share Posted May 14, 2012 Using the edge sander make quick work of sanding the 3 1/2'' wide wedge cut of the paddle blade...kind of a pane using it to sculpt with but it worked...has 80 grit.... The sander has been in use for over 20 yrs...... http://s147.photobucket.com/albums/r302/scrawford_photos/edge%20sander/ Quote Link to comment Share on other sites More sharing options...
Hirilonde Posted May 14, 2012 Report Share Posted May 14, 2012 I really like my bench top belt sander. But for paddles I agree with Jeff on tools and technique. I don't think any tool, ancient or modern, power or hand can compete with a good hand plane for shaping. Quote Link to comment Share on other sites More sharing options...
P Doug (WA) Posted May 14, 2012 Report Share Posted May 14, 2012 Yep, that sander is cool. What a beast! Quote Link to comment Share on other sites More sharing options...
woodman Posted May 23, 2012 Author Report Share Posted May 23, 2012 What would make a good drip stop? I was thinking some leather strips ... Quote Link to comment Share on other sites More sharing options...
Kudzu Posted May 23, 2012 Report Share Posted May 23, 2012 Only thing I have found is a spray skirt. Actually I have found one thing that shows promise. If you're using a GP correctly you don't want anything that will get in the way when you slide your hand down the blade. But the 'scrunchies' that the women pull their hair into a pony tail with, I tried some and they really worked but they were not tight enough to stay on the paddle. Ended up loosing one pretty quick and other one slide way down the blade. But if you found one with the right tension I think it would work well. Otherwise nothing I have tried really does more than slow it down. Quote Link to comment Share on other sites More sharing options...
woodman Posted May 23, 2012 Author Report Share Posted May 23, 2012 I have been fishing out of mine, don't have a skirt yet....just wear swimming trunks.... Quote Link to comment Share on other sites More sharing options...
Hirilonde Posted May 24, 2012 Report Share Posted May 24, 2012 Nothing but a skirt will keep you really dry, but buttons on the loom just inside the blades help a lot. Quote Link to comment Share on other sites More sharing options...
bentg Posted May 26, 2012 Report Share Posted May 26, 2012 Buttons? Quote Link to comment Share on other sites More sharing options...
jerryg Posted May 26, 2012 Report Share Posted May 26, 2012 Hey Woodman, I ws just wondering how you picked the various dimensions for your paddle. Did you eyeball the whole thing, or work from some specs? Thanks. Jerry Quote Link to comment Share on other sites More sharing options...
Hirilonde Posted May 26, 2012 Report Share Posted May 26, 2012 Buttons? Quote Link to comment Share on other sites More sharing options...
Kudzu Posted May 27, 2012 Report Share Posted May 27, 2012 Jerry, somewhere on the web there is a formula for sizing a Greenland paddle to your size. I follow it roughly, I like a bigger shaft than they recommend but the more I paddle the more I come around the the suggested length and blade sizes. Quote Link to comment Share on other sites More sharing options...
HonestKen Posted May 27, 2012 Report Share Posted May 27, 2012 For sizing and building here is a good link http://www.qajaqusa.org/QK/makegreen2.pdf I like to laminate my blanks for strength and no warp. If you laminate be sure to run the grain the same way or it makes planing less than enjoyable. Been using the same paddle and storm paddle for about 10 years now, unfinished cedar. very pleased with the performance and how they have held up on granite. rock and sand. A real enjoyable project but can you say 'wood shavings'? Bussels of them from just a weenie greenland paddle. Enjoy the project. Ken Quote Link to comment Share on other sites More sharing options...
Hirilonde Posted May 27, 2012 Report Share Posted May 27, 2012 For sizing and building here is a good link http://www.qajaqusa..../makegreen2.pdf................................ I used that very article for design and sizing of my paddle. The result is in the same photo showing a button above. I can't claim to be an expert yet, but it seems to be very thorough in practical info and historic background. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.