While looking at the offsets and trying to loft the frames I noticed what I see as a mistake but can't 100% define it as a mistake, on the 58" frame offset #3 reads 11 15/16, 0 but when lofting it seems to me the 0 should be in the 8 6/16 regions... just wondering if I was wrong in that assumption.
Also I was looking for some advice on the best way to lash what I would consider the Keel Strip to the Bow and Stern plates?
FreeB
Started By
Guest_CameronG_*
, Jul 06 2010 02:15 PM
1 reply to this topic
#2
Kudzu
-
- Members
-
- 1,334 posts
Advanced Member
Posted 06 July 2010 - 02:34 PM
Just got a chance to double check this and your right. I have no idea how that got left out but it should be 7 12/16" (7 3/4"). I just corrected the offsets Sheet and will upload it to web site in a little while.
I have a video I am working on, actually I have several of them that I need to get online. But one shows how to do the bow. I will see if I can't get some of those finished and online tomorrow. But here is photo of VARDO's bow. It's called a Y lashing, you start out with 'V' shape and then tie that off to pull it even tighter and gives the 'Y' shape to it.
I have a video I am working on, actually I have several of them that I need to get online. But one shows how to do the bow. I will see if I can't get some of those finished and online tomorrow. But here is photo of VARDO's bow. It's called a Y lashing, you start out with 'V' shape and then tie that off to pull it even tighter and gives the 'Y' shape to it.
