Oceantrader Posted November 10, 2016 Report Share Posted November 10, 2016 Is it possible to change an existing Spindrift 10 or 11 into a nesting version by glassing in 2 bulkheads just forward of amidship and making the cut? Then cut a notch in the aft bench?? How different are the standard and nesting boats? Thanks! Quote Link to comment Share on other sites More sharing options...
Wile E. Coyote Posted November 18, 2016 Report Share Posted November 18, 2016 The cockpit is a bit different, but that can be seen easily enough. If you have a sailing version then the daggerboard trunk is different. In the normal version the dagggerboard is vertical, in the nesting version the daggerboard trunk is further forward and the board runs at an angle backwards. Quote Link to comment Share on other sites More sharing options...
Alex Posted November 18, 2016 Report Share Posted November 18, 2016 Of course it is possible to cut the boat in half but they won't nest, they will stack. It would be easier to just build the version you want from scratch or a kit. It is a fairly quick build. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.